Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
Modular milling head
Characteristics
Helix angle 32/34°
Ball nose
Teeth 4
Applications
Feed direction ball nose (Side milling, Ramping, Drilling)
Ramping 45° ball nose
Slotting ball nose
Side milling ball nose
3D milling
Areas of application-material
Steel
Stainless steel
Cast iron
High temperature alloys and titanium alloys
NF metals
Hard materials
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
Modular milling head
Quality pass
Fine balanced
Best length repeatability
- Neck for higher cutting depth
- Ball nose
- Unequal helix
- Fine balanced
- Best length repeatability
- For almost all materials
- For roughing and finishing
- Copy milling
- Profile milling
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL10 | |
| Cutting edge diameter | D1 | 10 mm |
| Cooling | with radial cooling | |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Length of cutting edge | L1 | 7,5 mm |
| Overalllength | L | 25 mm |
| Head length | L | 12,5 mm |
| Neck diameter | D2 | 9,6 mm |
| Shank diameter | D | 7,5 mm |
| Shanklength | LS | 12,5 mm |
| Wrench size | 8 | |
| Type | L1 max, = 7,5 | |
| Helix angle | 32,5/34,5 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 20 Nm | |
| Cutting diameter | A1 | 10 mm |
| Peripheral effective cutting edge count | F21 | 4 |
| Cutting edge length, max. | B2 | 7,5 mm |
| Overalllength | B5 | 25 mm |
| Head length | B6 | 12,5 mm |
| Neck diameter | A5 | 9,6 mm |
| Connection diameter, machine side | C3 | 7,5 mm |
| Shanklength | C4 | 12,5 mm |
| Helix angle | F4 | 33,5 ° |
| Mass (weight) | D7 | 0,013 kg |
| Weight | WT | 0,013 kg |
Characteristics
Helix angle 32/34°
Helix angle 32/34°
Helix angle 32/34°
Ball nose
Ball nose
Ball nose
Teeth 4
Teeth 4
Teeth 4
Applications
- For almost all materials
- For roughing and finishing
- Copy milling
- Profile milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction ball nose (Side milling, Ramping, Drilling)
Feed direction ball nose (Side milling, Ramping, Drilling)
Ramping 45° ball nose
Ramping 45° ball nose
Slotting ball nose
Slotting ball nose
Side milling ball nose
Side milling ball nose
3D milling
3D milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Inner cooling
Inner cooling
Cutting Data
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
Description
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
Modular milling head
Quality pass
Fine balanced
Best length repeatability
Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
- Neck for higher cutting depth
- Ball nose
- Unequal helix
- Fine balanced
- Best length repeatability
- For almost all materials
- For roughing and finishing
- Copy milling
- Profile milling
Technical specifications
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL10 | |
| Cutting edge diameter | D1 | 10 mm |
| Cooling | with radial cooling | |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Length of cutting edge | L1 | 7,5 mm |
| Overalllength | L | 25 mm |
| Head length | L | 12,5 mm |
| Neck diameter | D2 | 9,6 mm |
| Shank diameter | D | 7,5 mm |
| Shanklength | LS | 12,5 mm |
| Wrench size | 8 | |
| Type | L1 max, = 7,5 | |
| Helix angle | 32,5/34,5 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 20 Nm | |
| Cutting diameter | A1 | 10 mm |
| Peripheral effective cutting edge count | F21 | 4 |
| Cutting edge length, max. | B2 | 7,5 mm |
| Overalllength | B5 | 25 mm |
| Head length | B6 | 12,5 mm |
| Neck diameter | A5 | 9,6 mm |
| Connection diameter, machine side | C3 | 7,5 mm |
| Shanklength | C4 | 12,5 mm |
| Helix angle | F4 | 33,5 ° |
| Mass (weight) | D7 | 0,013 kg |
| Weight | WT | 0,013 kg |
Characteristics
Helix angle 32/34°
Helix angle 32/34°
Helix angle 32/34°
Ball nose
Ball nose
Ball nose
Teeth 4
Teeth 4
Teeth 4
Applications
Applications
- For almost all materials
- For roughing and finishing
- Copy milling
- Profile milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction ball nose (Side milling, Ramping, Drilling)
Feed direction ball nose (Side milling, Ramping, Drilling)
Ramping 45° ball nose
Ramping 45° ball nose
Slotting ball nose
Slotting ball nose
Side milling ball nose
Side milling ball nose
3D milling
3D milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Inner cooling
Inner cooling
cutting data
Cutting Data
Duo-Lock HAIMER MILL - V2004UK Ball Nose - Radial cooling
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Cutting edge diameter | Duo-Lock size | HAIMER Coating | Head length | Length of cutting edge | Number of cutting edges | Shank diameter | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|---|---|
| DL10V2004UK1000RDA | 10 mm | DL10 | A | 12,5 mm | 7,5 mm | 4 | 7,5 mm |
Download after registration
|
|
| DL10V2004UK1000RDAKR | 10 mm | DL10 | A | 12,5 mm | 7,5 mm | 4 | 7,5 mm |
|
|
| DL12V2004UK1200RDA | 12 mm | DL12 | A | 15 mm | 9 mm | 4 | 8,5 mm |
Download after registration
|
|
| DL12V2004UK1200RDAKR | 12 mm | DL12 | A | 15 mm | 9 mm | 4 | 8,5 mm |
|
|
| DL16V2004UK1600RDA | 16 mm | DL16 | A | 20 mm | 12 mm | 4 | 11,5 mm |
Download after registration
|
|
| DL16V2004UK1600RDAKR | 16 mm | DL16 | A | 20 mm | 12 mm | 4 | 11,5 mm |
|
|
| DL20V2004UK2000RDA | 20 mm | DL20 | A | 25 mm | 15 mm | 4 | 14,5 mm |
Download after registration
|
|
| DL20V2004UK2000RDAKR | 20 mm | DL20 | A | 25 mm | 15 mm | 4 | 14,5 mm |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001