For holding face mill cutters and cutters with radial driving slot DIN 1880.
DIN 69882-3
Face Mill Arbor, DIN 69893-1, HSK-A125
Face Mill Arbor, DIN 69893-1, HSK-A125
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
- Reinforced outer contour
- With coolant exit bores on the end face for milling cutters with central cooling
Scope of Delivery
- With tightening bolt
- With balancing thread
- Without coolant tube
Face Mill Arbor, DIN 69893-1, HSK-A125
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 1 inch |
| Length A | A | 4 inch |
| A-length version | short | |
| Diameter 2 | D2 | 2.165 inch |
| Length | L | 0.669 inch |
| Interface | HSK-A125 | |
| Mass (weight) | D7 | 11.446 lbs |
| Flange diameter | A4 | 4.921 inch |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| interface code to machine side | J6 | HSK12500115 |
| Weight | WT | 11.446 lbs |
| Flange diameter | DF | 4.921 inch |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
Description
Face Mill Arbor, DIN 69893-1, HSK-A125
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
For holding face mill cutters and cutters with radial driving slot DIN 1880.
DIN 69882-3
DIN 69882-3
- Reinforced outer contour
- With coolant exit bores on the end face for milling cutters with central cooling
Scope of Delivery
- With tightening bolt
- With balancing thread
- Without coolant tube
Technical specifications
Face Mill Arbor, DIN 69893-1, HSK-A125
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 1 inch |
| Length A | A | 4 inch |
| A-length version | short | |
| Diameter 2 | D2 | 2.165 inch |
| Length | L | 0.669 inch |
| Interface | HSK-A125 | |
| Mass (weight) | D7 | 11.446 lbs |
| Flange diameter | A4 | 4.921 inch |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| interface code to machine side | J6 | HSK12500115 |
| Weight | WT | 11.446 lbs |
| Flange diameter | DF | 4.921 inch |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| A125.050.1Z.3.I | short | 1 inch | HSK-A125 | 4 inch |
Download after registration
|
|
| A125.050.3/4Z.3.I | short | 3/4 inch | HSK-A125 | 4 inch |
Download after registration
|
|
| A125.052.1Z.3.I | oversize (160 mm) | 1 inch | HSK-A125 | 7 inch |
Download after registration
|
|
| A125.052.3/4Z.3.I | oversize (160 mm) | 3/4 inch | HSK-A125 | 7 inch |
Download after registration
|
|
| A125.054.1Z.3.I | AL130 | 1 inch | HSK-A125 | 5 inch |
Download after registration
|
|
| A125.054.3/4Z.3.I | AL130 | 3/4 inch | HSK-A125 | 5 inch |
Download after registration
|
|
| A125.056.1Z.3.I | ZG200 | 1 inch | HSK-A125 | 9 inch |
Download after registration
|
|
| A125.056.3/4Z.3.I | ZG200 | 3/4 inch | HSK-A125 | 9 inch |
Download after registration
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001