For holding face mill cutters and cutters with radial driving slot DIN 1880.
DIN 69882-3
Face Mill Arbor, DIN 69893-1, HSK-A125
Face Mill Arbor, DIN 69893-1, HSK-A125
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
- Reinforced outer contour
- With coolant exit bores on the end face for milling cutters with central cooling
Scope of Delivery
- With tightening bolt
- With balancing thread
- Without coolant tube
Face Mill Arbor, DIN 69893-1, HSK-A125
Description | Norm: | Value: metric/ inch |
---|---|---|
Clamping diameter | D1 | 25,4 mm |
Length A | A | 101,6 mm |
A-length version | short | |
Diameter 2 | D2 | 55 mm |
Length | L | 17 mm |
Interface | HSK-A125 | |
Mass (weight) | D7 | 5,191 kg |
Flange diameter | A4 | 125 mm |
Hand | E1 | N |
Company identification | J3 | HAI |
interface code to machine side | J6 | HSK12500115 |
Weight | WT | 5,191 kg |
Flange diameter | DF | 125 mm |
Hand | HAND | N |
Company identification | COMPC | HAI |
Description
Face Mill Arbor, DIN 69893-1, HSK-A125
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
For holding face mill cutters and cutters with radial driving slot DIN 1880.
DIN 69882-3
DIN 69882-3
- Reinforced outer contour
- With coolant exit bores on the end face for milling cutters with central cooling
Scope of Delivery
- With tightening bolt
- With balancing thread
- Without coolant tube
Technical specifications
Face Mill Arbor, DIN 69893-1, HSK-A125
Description | Norm: | Value: metric/ inch |
---|---|---|
Clamping diameter | D1 | 25,4 mm |
Length A | A | 101,6 mm |
A-length version | short | |
Diameter 2 | D2 | 55 mm |
Length | L | 17 mm |
Interface | HSK-A125 | |
Mass (weight) | D7 | 5,191 kg |
Flange diameter | A4 | 125 mm |
Hand | E1 | N |
Company identification | J3 | HAI |
interface code to machine side | J6 | HSK12500115 |
Weight | WT | 5,191 kg |
Flange diameter | DF | 125 mm |
Hand | HAND | N |
Company identification | COMPC | HAI |
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001