Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
Modular milling head
Characteristics
Helix angle 36,5/38,5°
Corner chamfer 45°
Teeth 4
Applications
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Slotting
Side milling
Areas of application-material
Steel
Stainless steel
Cast iron
High temperature alloys and titanium alloys
NF metals
Hard materials
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
Modular milling head
Quality pass
Particularly suitable for Long overhang and labile clamping
Best results with DL-HM extension
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal helix
- Best length repeatability
- Polished flute and relief
- For almost all materials
- Particularly suitable for long overhang and labile clamping
- Suitable for profile milling
HAIMER TIP
Best results with solid carbide Duo-Lock extension
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL16 | |
| Cutting edge diameter | D1 | 0.63 inch |
| Cooling | with radial cooling | |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Corner design | C | |
| Chamfer size | C | 0.013 inch |
| Chamfer angle | W | 45 ° |
| Length of cutting edge | L1 | 0.945 inch |
| Overalllength | L | 2.047 inch |
| Head length | L | 1.26 inch |
| Neck diameter | D2 | 0.61 inch |
| Shank diameter | D | 0.453 inch |
| Shanklength | LS | 0.787 inch |
| Wrench size | 13 | |
| Type | L1 max. = 24 | |
| Helix angle | 37/39 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 60 Nm | |
| Cutting diameter | A1 | 0.63 inch |
| Peripheral effective cutting edge count | F21 | 4 |
| Corner chamfer width | G2 | 0.013 inch |
| Corner chamfer angle | G3 | 45 ° |
| Cutting edge length, max. | B2 | 0.945 inch |
| Overalllength | B5 | 2.047 inch |
| Head length | B6 | 1.26 inch |
| Neck diameter | A5 | 0.61 inch |
| Connection diameter, machine side | C3 | 0.453 inch |
| Shanklength | C4 | 0.787 inch |
| Helix angle | F4 | 38 ° |
| Mass (weight) | D7 | 0.187 lbs |
| Weight | WT | 0.187 lbs |
Characteristics
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
Applications
- For almost all materials
- Particularly suitable for long overhang and labile clamping
- Suitable for profile milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
TIP
Best results with solid carbide Duo-Lock extension
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Inner cooling
Inner cooling
Cutting Data
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
Description
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
Modular milling head
Quality pass
Particularly suitable for Long overhang and labile clamping
Best results with DL-HM extension
Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal helix
- Best length repeatability
- Polished flute and relief
- For almost all materials
- Particularly suitable for long overhang and labile clamping
- Suitable for profile milling
HAIMER TIP
Best results with solid carbide Duo-Lock extension
Technical specifications
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL16 | |
| Cutting edge diameter | D1 | 0.63 inch |
| Cooling | with radial cooling | |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Corner design | C | |
| Chamfer size | C | 0.013 inch |
| Chamfer angle | W | 45 ° |
| Length of cutting edge | L1 | 0.945 inch |
| Overalllength | L | 2.047 inch |
| Head length | L | 1.26 inch |
| Neck diameter | D2 | 0.61 inch |
| Shank diameter | D | 0.453 inch |
| Shanklength | LS | 0.787 inch |
| Wrench size | 13 | |
| Type | L1 max. = 24 | |
| Helix angle | 37/39 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 60 Nm | |
| Cutting diameter | A1 | 0.63 inch |
| Peripheral effective cutting edge count | F21 | 4 |
| Corner chamfer width | G2 | 0.013 inch |
| Corner chamfer angle | G3 | 45 ° |
| Cutting edge length, max. | B2 | 0.945 inch |
| Overalllength | B5 | 2.047 inch |
| Head length | B6 | 1.26 inch |
| Neck diameter | A5 | 0.61 inch |
| Connection diameter, machine side | C3 | 0.453 inch |
| Shanklength | C4 | 0.787 inch |
| Helix angle | F4 | 38 ° |
| Mass (weight) | D7 | 0.187 lbs |
| Weight | WT | 0.187 lbs |
Characteristics
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
applications
Applications
- For almost all materials
- Particularly suitable for long overhang and labile clamping
- Suitable for profile milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
TIP
Best results with solid carbide Duo-Lock extension
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Inner cooling
Inner cooling
Cutting Data
Cutting Data
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer Coated - radial cooling
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Chamfer size | Corner design | Cutting edge diameter | Duo-Lock size | HAIMER Coating | Head length | Length of cutting edge | Number of cutting edges | Shank diameter | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DL10F1004MN1000CDA | 0.008 inch | C | 0.394 inch | DL10 | A | 0.787 inch | 0.591 inch | 4 | 0.295 inch |
Download after registration
|
|
| DL10F1004MN1000CDAKR | 0.008 inch | C | 0.394 inch | DL10 | A | 0.787 inch | 0.591 inch | 4 | 0.295 inch |
|
|
| DL10F1004MN3/8ZCDA | 0.007 inch | C | 3/8 inch | DL10 | A | 0.787 inch | 0.591 inch | 4 | 0.295 inch |
|
|
| DL12F1004MN1/2ZCDA | 0 inch | C | 1/2 inch | DL12 | A | 0.945 inch | 0.709 inch | 4 | 0.335 inch |
|
|
| DL12F1004MN1200CDA | 0.009 inch | C | 0.472 inch | DL12 | A | 0.945 inch | 0.709 inch | 4 | 0.335 inch |
Download after registration
|
|
| DL12F1004MN1200CDAKR | 0.009 inch | C | 0.472 inch | DL12 | A | 0.945 inch | 0.709 inch | 4 | 0.335 inch |
|
|
| DL16F1004MN1600CDA | 0.013 inch | C | 0.63 inch | DL16 | A | 1.26 inch | 0.945 inch | 4 | 0.453 inch |
Download after registration
|
|
| DL16F1004MN1600CDAKR | 0.013 inch | C | 0.63 inch | DL16 | A | 1.26 inch | 0.945 inch | 4 | 0.453 inch |
|
|
| DL16F1004MN5/8ZCDA | C | 5/8 inch | DL16 | A | 1.26 inch | 0.945 inch | 4 | 0.453 inch |
|
||
| DL20F1004MN2000CDA | 0.016 inch | C | 0.787 inch | DL20 | A | 1.575 inch | 1.181 inch | 4 | 0.571 inch |
Download after registration
|
|
| DL20F1004MN2000CDAKR | 0.016 inch | C | 0.787 inch | DL20 | A | 1.575 inch | 1.181 inch | 4 | 0.571 inch |
|
|
| DL20F1004MN3/4ZCDA | C | 3/4 inch | DL20 | A | 1.575 inch | 1.181 inch | 4 | 0.571 inch |
|
||
| DL25F1004MN2500CDA | 0.02 inch | C | 0.984 inch | DL25 | D | 1.969 inch | 1.476 inch | 4 | 0.689 inch |
|
|
| DL32F1004MN3200CDA | 0.025 inch | C | 1.26 inch | DL32 | D | 2.52 inch | 1.89 inch | 4 | 0.886 inch |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001