Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
Modular milling head
Characteristics
Helix angle
Corner chamfer 45°
Teeth 4
Applications
Feed direction (Side milling, Ramping)
Ramping 3-5°
Slotting
Side milling
Areas of application-material
Steel
Stainless steel
Cast iron
High temperature alloys and titanium alloys
NF metals
Hard materials
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
Modular milling head
Quality pass
Fine balanced
Best length repeatability
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal helix
- Fine balanced
- Best length repeatability
- For almost all materials
- For roughing
- For improved chip removal
- For reduced cutting forces
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL20 | |
| Cutting edge diameter | D1 | 3/4 inch |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Corner design | C | |
| Chamfer size | C | 0.024 inch |
| Chamfer angle | W | 45 ° |
| Length of cutting edge | L1 | 1.181 inch |
| Overalllength | L | 2.516 inch |
| Head length | L | 1.575 inch |
| Neck diameter | D2 | 0.73 inch |
| Shank diameter | D | 0.571 inch |
| Shanklength | LS | 0.941 inch |
| Wrench size | 16 | |
| Helix angle | 32.5/34.5 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 80 Nm | |
| Cutting diameter | A1 | 3/4 inch |
| Peripheral effective cutting edge count | F21 | 4 |
| Corner chamfer width | G2 | 0.024 inch |
| Corner chamfer angle | G3 | 45 ° |
| Cutting edge length, max. | B2 | 1.181 inch |
| Overalllength | B5 | 2.516 inch |
| Head length | B6 | 1.575 inch |
| Neck diameter | A5 | 0.73 inch |
| Connection diameter, machine side | C3 | 0.571 inch |
| Shanklength | C4 | 0.941 inch |
| Helix angle | F4 | 33,5 ° |
| Mass (weight) | D7 | 0.34 lbs |
| Standard number of properties layout | NSM | DIN4000-82 |
| Corner design | F72 | 2 - |
| Usable length | B4 | 1.575 inch |
| Protruding length | B3 | 1.575 inch |
| Functional length | B71 | 1.575 inch |
| Connection code type machine side | C11 | SAH |
| Connection code form type machine side | C12 | 01 |
| Connection code unit base machine side | C14 | 8 |
| Connection code style machine side | C15 | 5 |
| Connection size code machine side | C2 | 0200 |
| mill tool type ISO | D11 | H |
| Hand | F1 | R |
| flute helix hand | F3 | R |
| face effective cutting edge count | F22 | 4 - |
| cutting edge centre count | F27 | 1 - |
| grade manufacturer's designation | H3 | VHM |
| Coating | H5 | ALTIN |
| Cutting tool type | H4 | H |
| grade standard designation, main application | H11 | HC |
| Company identification | J3 | HAI |
| interface code to machine side | J6 | SAH02000185 |
| machining process | J8 | FNB |
| Weight | WT | 0.34 lbs |
Characteristics
Helix angle
Helix angle
Helix angle
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
Applications
- For almost all materials
- For roughing
- For improved chip removal
- For reduced cutting forces
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Cutting Data
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
Description
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
Modular milling head
Quality pass
Fine balanced
Best length repeatability
Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal helix
- Fine balanced
- Best length repeatability
- For almost all materials
- For roughing
- For improved chip removal
- For reduced cutting forces
Technical specifications
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Duo-Lock size | DL20 | |
| Cutting edge diameter | D1 | 3/4 inch |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Corner design | C | |
| Chamfer size | C | 0.024 inch |
| Chamfer angle | W | 45 ° |
| Length of cutting edge | L1 | 1.181 inch |
| Overalllength | L | 2.516 inch |
| Head length | L | 1.575 inch |
| Neck diameter | D2 | 0.73 inch |
| Shank diameter | D | 0.571 inch |
| Shanklength | LS | 0.941 inch |
| Wrench size | 16 | |
| Helix angle | 32.5/34.5 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A | |
| Torque | 80 Nm | |
| Cutting diameter | A1 | 3/4 inch |
| Peripheral effective cutting edge count | F21 | 4 |
| Corner chamfer width | G2 | 0.024 inch |
| Corner chamfer angle | G3 | 45 ° |
| Cutting edge length, max. | B2 | 1.181 inch |
| Overalllength | B5 | 2.516 inch |
| Head length | B6 | 1.575 inch |
| Neck diameter | A5 | 0.73 inch |
| Connection diameter, machine side | C3 | 0.571 inch |
| Shanklength | C4 | 0.941 inch |
| Helix angle | F4 | 33,5 ° |
| Mass (weight) | D7 | 0.34 lbs |
| Standard number of properties layout | NSM | DIN4000-82 |
| Corner design | F72 | 2 - |
| Usable length | B4 | 1.575 inch |
| Protruding length | B3 | 1.575 inch |
| Functional length | B71 | 1.575 inch |
| Connection code type machine side | C11 | SAH |
| Connection code form type machine side | C12 | 01 |
| Connection code unit base machine side | C14 | 8 |
| Connection code style machine side | C15 | 5 |
| Connection size code machine side | C2 | 0200 |
| mill tool type ISO | D11 | H |
| Hand | F1 | R |
| flute helix hand | F3 | R |
| face effective cutting edge count | F22 | 4 - |
| cutting edge centre count | F27 | 1 - |
| grade manufacturer's designation | H3 | VHM |
| Coating | H5 | ALTIN |
| Cutting tool type | H4 | H |
| grade standard designation, main application | H11 | HC |
| Company identification | J3 | HAI |
| interface code to machine side | J6 | SAH02000185 |
| machining process | J8 | FNB |
| Weight | WT | 0.34 lbs |
Characteristics
Helix angle
Helix angle
Helix angle
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
applications
Applications
- For almost all materials
- For roughing
- For improved chip removal
- For reduced cutting forces
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Cutting Data
Cutting Data
Duo-Lock HAIMER MILL - F2304MN Chamfer rough toothing
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Chamfer size | Corner design | Cutting edge diameter | Duo-Lock size | HAIMER Coating | Head length | Length of cutting edge | Number of cutting edges | Shank diameter | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DL10F2304MN1000CDA | 0.012 inch | C | 0.394 inch | DL10 | A | 0.787 inch | 0.591 inch | 4 | 0.295 inch |
Download after registration
|
|
| DL10F2304MN3/8ZCDA | 0.012 inch | C | 3/8 inch | DL10 | A | 0.787 inch | 0.591 inch | 4 | 0.295 inch |
|
|
| DL12F2304MN1/2ZCDA | 0.012 inch | C | 1/2 inch | DL12 | A | 0.945 inch | 0.709 inch | 4 | 0.335 inch |
|
|
| DL12F2304MN1200CDA | 0.012 inch | C | 0.472 inch | DL12 | A | 0.945 inch | 0.709 inch | 4 | 0.335 inch |
Download after registration
|
|
| DL16F2304MN1600CDA | 0.02 inch | C | 0.63 inch | DL16 | A | 1.26 inch | 0.945 inch | 4 | 0.453 inch |
Download after registration
|
|
| DL16F2304MN5/8ZCDA | 0.02 inch | C | 5/8 inch | DL16 | A | 1.26 inch | 0.945 inch | 4 | 0.453 inch |
|
|
| DL20F2304MN2000CDA | 0.024 inch | C | 0.787 inch | DL20 | A | 1.575 inch | 1.181 inch | 4 | 0.571 inch |
Download after registration
|
|
| DL20F2304MN3/4ZCDA | 0.024 inch | C | 3/4 inch | DL20 | A | 1.575 inch | 1.181 inch | 4 | 0.571 inch |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001