Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
Descripción
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
Pasaporte de calidad
Portaherramientas con equilibrado fino G 2.5 a 25.000 rpm
Todas las superficies funcionales rectificadas
Más preciso que DIN
Compatible con Capto
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Volumen de suministro
Without back-up screw, without thread for balancing screws, without slits along the clamping bore for cooling from outside, not suitable for HSS tools
HAIMER TIPP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
Datos técnicos
Aviso
Technical data subjects to change without prior notice.
| Descripción | Norma: Haimer | Valor: metric/inch |
|---|---|---|
| Diámetro de sujeción | D1 | 4 mm / 0.157 inch |
| Longitud A | A | 75 mm / 2.953 inch |
| Versión de longitud A | kurz | |
| Diámetro 2 | D2 | 10 mm / 0.394 inch |
| Diámetro 3 | D3 | - mm |
| Longitud | L | - mm |
| Interfaz | PSC50 |