Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
说明
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
质量护照
刀柄精细动平衡 G2.5， 25,000 1/min
所有的功能表面都是精加工的
精度超过DIN标准的要求
与 Capto 兼容
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
交付范围
Without back-up screw, without thread for balancing screws, without slits along the clamping bore for cooling from outside, not suitable for HSS tools
翰默-提普
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
技术规格
通知
Technical data subjects to change without prior notice.
| 说明 | 规范： 翰默 | 价值： 公制/寸 |
|---|---|---|
| 夹持部位的直径 | D1 | 4 mm / 0.157 inch |
| 长度A | A | 75 mm / 2.953 inch |
| A长度的版本 | kurz | |
| 直径2 | D2 | 10 mm / 0.394 inch |
| 直径3 | D3 | - mm |
| 长度 | L | - mm |
| 接口 | PSC50 |