Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Without back-up screw, without thread for balancing screws, without slits along the clamping bore for cooling from outside, not suitable for HSS tools
Description | Norm: | Value: metric/ inch |
---|---|---|
Clamping diameter | D1 | 5 mm |
Length A | A | 75 mm |
A-length version | short | |
Diameter 2 | D2 | 10 mm |
Diameter 3 | D3 | - mm |
Length | L | - mm |
Interface | PSC50 |
Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Without back-up screw, without thread for balancing screws, without slits along the clamping bore for cooling from outside, not suitable for HSS tools
Description | Norm: | Value: metric/ inch |
---|---|---|
Clamping diameter | D1 | 5 mm |
Length A | A | 75 mm |
A-length version | short | |
Diameter 2 | D2 | 10 mm |
Diameter 3 | D3 | - mm |
Length | L | - mm |
Interface | PSC50 |
Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
---|---|---|---|---|---|---|
CC5.140.03.1 | short | 3 mm | PSC50 | 75 mm |
|
|
CC5.140.04.1 | short | 4 mm | PSC50 | 75 mm |
|
|
CC5.140.05.1 | short | 5 mm | PSC50 | 75 mm |
|
|
CC5.140.06 | short | 6 mm | PSC50 | 75 mm |
|
|
CC5.140.08 | short | 8 mm | PSC50 | 75 mm |
|
|
CC5.140.10 | short | 10 mm | PSC50 | 75 mm |
|
|
CC5.140.12 | short | 12 mm | PSC50 | 75 mm |
|
|
CC5.140.14 | short | 14 mm | PSC50 | 80 mm |
|
|
CC5.140.16 | short | 16 mm | PSC50 | 80 mm |
|
|
CC5.140.18 | short | 18 mm | PSC50 | 80 mm |
|
|
CC5.140.20 | short | 20 mm | PSC50 | 85 mm |
|
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001