Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
ISO 26623.
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Scope of Delivery
With back-up screw without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 75 mm |
| A-length version | short | |
| Diameter 2 | D2 | 10 mm |
| Diameter 3 | D3 | - mm |
| Length | L | - mm |
| Interface | PSC50 |
Description
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm.
ISO 26623.
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Scope of Delivery
With back-up screw without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
Technical specifications
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 75 mm |
| A-length version | short | |
| Diameter 2 | D2 | 10 mm |
| Diameter 3 | D3 | - mm |
| Length | L | - mm |
| Interface | PSC50 |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| CC5.140.03.1 | short | 3 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.04.1 | short | 4 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.05.1 | short | 5 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.06 | short | 6 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.08 | short | 8 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.10 | short | 10 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.12 | short | 12 mm | PSC50 | 75 mm |
Download after registration
|
|
| CC5.140.14 | short | 14 mm | PSC50 | 80 mm |
Download after registration
|
|
| CC5.140.16 | short | 16 mm | PSC50 | 80 mm |
Download after registration
|
|
| CC5.140.18 | short | 18 mm | PSC50 | 80 mm |
Download after registration
|
|
| CC5.140.20 | short | 20 mm | PSC50 | 85 mm |
Download after registration
|
Accessories
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001