back

Power Collet Chuck, DIN 69893-1, HSK-A63

Power Collet Chuck DIN 69893-1 · HSK-A63
Technical drawing Power Collet Chuck DIN 69893-1 · HSK-A63
Power Collet Chuck DIN 69893-1 · HSK-A63
Technical drawing Power Collet Chuck DIN 69893-1 · HSK-A63
Order number:
Power Collet Chuck, DIN 69893-1, HSK-A63
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
  • High runout accuracy: 0.003 mm at 3 × D with HAIMER Power Collets
  • Also suitable for standard collets ER according to ISO 15488 (Please note when use with standard ER collets the gage length A will vary.))
  • High rigidity
  • Smoother running thanks to vibration absorbing geometry, therefore better surface quality and protection of tools, spindles and machines
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times, higher machining accuracy, high clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • With threaded holes in order to balance with balancing screws
HAIMER TIP
Optional: With Safe-Lock Power Collets from ER 25 Optional: Cool Jet bores on Power Collets from ER 25 Ø 6 mm
The most important features:
  • 1. Low tendency towards vibrations by rigid shank
  • 2. High-precision Power Collet with stabilisation and concentration trough pilot of collet
  • 3. Fine balanced Power Collet ER nut
  • 4. in High-precision Power Collet (optional)
  • 5. High runout accuracy(< 0,003 mm)
Cool Jet for Power Collets (optional)
  • Optimized coolant bores, aimed at center in der Spannzange
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Safe-Lock pull out protection
  • High-precision Power Collets with stabilisation and concentration trough pilot of collet
  • High torque due to form closed clamping
  • No pull out and no spinning ot the tool
  • Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
  • Safe-Lock starting at ER 25
Power Collet Chuck, DIN 69893-1, HSK-A63
asset-112072-644
Description Norm: Value: metric/ inch
Size ER16
Clamping range 2,0-10,0
Length A A 100 mm
A-length version short
Length L 43 mm
Interface HSK-A63
Mass (weight) D7 0,920 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 28 mm
Chamfer angle at length 1 A1_CHA 45 °
Chamfer width at length 1 A1_CHW 4 mm
Flange diameter A4 63 mm
diameter lock nut, external diameter A5 28 mm
Protruding length B3 100 mm
Overall length B4 132 mm
Heihgt Clamping nut B6 17 mm
Functional length B71 67,5 mm
item style code BLD 504011
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0630
Connection code type workpiece side C51 SZD
Connection code form type workpiece side C52 02
Connection code unit base workpiece side C54 9
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0160
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Standard number J1 ISO 15488
Company identification J3 HAI
interface code to workpiece side J4 SZD01600295
interface code to machine side J6 HSK06300115
Weight WT 0,920 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 28 mm
Flange diameter DF 63 mm
Protruding length LPR 100 mm
Overall length OAL 132 mm
Functional length LF 67,5 mm
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 9
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0160
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
Power Collet Chuck, DIN 69893-1, HSK-A63
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
  • High runout accuracy: 0.003 mm at 3 × D with HAIMER Power Collets
  • Also suitable for standard collets ER according to ISO 15488 (Please note when use with standard ER collets the gage length A will vary.))
  • High rigidity
  • Smoother running thanks to vibration absorbing geometry, therefore better surface quality and protection of tools, spindles and machines
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times, higher machining accuracy, high clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • With threaded holes in order to balance with balancing screws
HAIMER TIP
Optional: With Safe-Lock Power Collets from ER 25 Optional: Cool Jet bores on Power Collets from ER 25 Ø 6 mm
The most important features:
  • 1. Low tendency towards vibrations by rigid shank
  • 2. High-precision Power Collet with stabilisation and concentration trough pilot of collet
  • 3. Fine balanced Power Collet ER nut
  • 4. in High-precision Power Collet (optional)
  • 5. High runout accuracy(< 0,003 mm)
Cool Jet for Power Collets (optional)
  • Optimized coolant bores, aimed at center in der Spannzange
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Safe-Lock pull out protection
  • High-precision Power Collets with stabilisation and concentration trough pilot of collet
  • High torque due to form closed clamping
  • No pull out and no spinning ot the tool
  • Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
  • Safe-Lock starting at ER 25
Power Collet Chuck, DIN 69893-1, HSK-A63
asset-112072-644
Description Norm: Value: metric/ inch
Size ER16
Clamping range 2,0-10,0
Length A A 100 mm
A-length version short
Length L 43 mm
Interface HSK-A63
Mass (weight) D7 0,920 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 28 mm
Chamfer angle at length 1 A1_CHA 45 °
Chamfer width at length 1 A1_CHW 4 mm
Flange diameter A4 63 mm
diameter lock nut, external diameter A5 28 mm
Protruding length B3 100 mm
Overall length B4 132 mm
Heihgt Clamping nut B6 17 mm
Functional length B71 67,5 mm
item style code BLD 504011
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0630
Connection code type workpiece side C51 SZD
Connection code form type workpiece side C52 02
Connection code unit base workpiece side C54 9
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0160
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Standard number J1 ISO 15488
Company identification J3 HAI
interface code to workpiece side J4 SZD01600295
interface code to machine side J6 HSK06300115
Weight WT 0,920 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 28 mm
Flange diameter DF 63 mm
Protruding length LPR 100 mm
Overall length OAL 132 mm
Functional length LF 67,5 mm
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 9
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0160
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping range Interface Length A Size Downloads metric/ inch
A63.020.16.3 short 2,0-10,0 HSK-A63 100 mm ER16
Download after registration
A63.020.25.3 short 2,0-16,0 HSK-A63 100 mm ER25
Download after registration
A63.020.32.3 short 2,0-20,0 HSK-A63 100 mm ER32
Download after registration
A63.022.16.3 oversize (160 mm) 2,0-10,0 HSK-A63 160 mm ER16
Download after registration
A63.022.25.3 oversize (160 mm) 2,0-16,0 HSK-A63 160 mm ER25
Download after registration
A63.022.32.3 oversize (160 mm) 2,0-20,0 HSK-A63 160 mm ER32
Download after registration
A63.025.16.3 ultra short 2,0-10,0 HSK-A63 75 mm ER16
Download after registration
A63.025.25.3 ultra short 2,0-16,0 HSK-A63 75 mm ER25
Download after registration
A63.025.32.3 ultra short 2,0-20,0 HSK-A63 75 mm ER32
Download after registration
Experience Haimer
Experience Haimer
At the Haimer Application Center
 Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
more information
Services
Services
Complaint and regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter