back

Power Collet Chuck ASME B5.50 · CAT40

Order number:
Size
A-length version
Power Collet Chuck ASME B5.50 · CAT40
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck suitable to all inductive shrink fit units.

The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times
  • Quieter running, therefore better surface quality and protection of tools, spindles and machines
  • Higher machining accuracy
  • Coolant supply form ADB
  • With threaded holes in order to balance with balancing screws
  • Cool Jet coolant bores that can be sealed included
  • Cooling with Cool Flash for an extra charge High rigidity
  • Slim at the tip
  • Dampen vibrations
  • Higher clamping forces
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
HAIMER TIP
The long versions with slim tips are especially versatile to use.
The most important features:
  • 1. Low tendency towards vibrations by rigid shank
  • 2. High-precision Power Collet with stabilisation and concentration trough pilot of collet
  • 3. Fine balanced Power Collet ER nut
  • 4. in High-precision Power Collet (optional)
  • 5. High runout accuracy(< 0,003 mm)
Cool Jet for Power Collets (optional)
  • Optimized coolant bores, aimed at center in der Spannzange
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Safe-Lock pull out protection
  • High-precision Power Collets with stabilisation and concentration trough pilot of collet
  • High torque due to form closed clamping
  • No pull out and no spinning ot the tool
  • Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
  • Safe-Lock starting at ER 25
Power Collet Chuck ASME B5.50 · CAT40
asset-111976-959
Description Norm: Value: metric/ inch
Size ER16
Clamping range 3,175-9,525
Length A A 70 mm
A-length version short
Diameter clamping nut D 28 mm
Length L 43 mm
Interface CAT40
Mass (weight) D7 0,950 kg
Connection code type machine side C11 SKG
Connection code form type machine side C12 37
Connection code unit base machine side C14 9
Connection code style machine side C15 5
Connection size code machine side C2 0400
Connection code type workpiece side C51 SZD
Connection code form type workpiece side C52 02
Connection code unit base workpiece side C54 9
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0160
coolant entry style code H21 7
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 SZD01600295
interface code to machine side J6 SKG04003795
Weight WT 0,950 kg
Connection code type machine side CCTMS SKG
Connection code unit base workpiece side CCUWS 9
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0160
coolant entry style code CNSC 7
coolant exit style code CXSC 1
Company identification COMPC HAI
Power Collet Chuck ASME B5.50 · CAT40
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck suitable to all inductive shrink fit units.

The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times
  • Quieter running, therefore better surface quality and protection of tools, spindles and machines
  • Higher machining accuracy
  • Coolant supply form ADB
  • With threaded holes in order to balance with balancing screws
  • Cool Jet coolant bores that can be sealed included
  • Cooling with Cool Flash for an extra charge High rigidity
  • Slim at the tip
  • Dampen vibrations
  • Higher clamping forces
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
HAIMER TIP
The long versions with slim tips are especially versatile to use.
The most important features:
  • 1. Low tendency towards vibrations by rigid shank
  • 2. High-precision Power Collet with stabilisation and concentration trough pilot of collet
  • 3. Fine balanced Power Collet ER nut
  • 4. in High-precision Power Collet (optional)
  • 5. High runout accuracy(< 0,003 mm)
Cool Jet for Power Collets (optional)
  • Optimized coolant bores, aimed at center in der Spannzange
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Safe-Lock pull out protection
  • High-precision Power Collets with stabilisation and concentration trough pilot of collet
  • High torque due to form closed clamping
  • No pull out and no spinning ot the tool
  • Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
  • Safe-Lock starting at ER 25
Power Collet Chuck ASME B5.50 · CAT40
asset-111976-959
Description Norm: Value: metric/ inch
Size ER16
Clamping range 3,175-9,525
Length A A 70 mm
A-length version short
Diameter clamping nut D 28 mm
Length L 43 mm
Interface CAT40
Mass (weight) D7 0,950 kg
Connection code type machine side C11 SKG
Connection code form type machine side C12 37
Connection code unit base machine side C14 9
Connection code style machine side C15 5
Connection size code machine side C2 0400
Connection code type workpiece side C51 SZD
Connection code form type workpiece side C52 02
Connection code unit base workpiece side C54 9
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0160
coolant entry style code H21 7
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 SZD01600295
interface code to machine side J6 SKG04003795
Weight WT 0,950 kg
Connection code type machine side CCTMS SKG
Connection code unit base workpiece side CCUWS 9
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0160
coolant entry style code CNSC 7
coolant exit style code CXSC 1
Company identification COMPC HAI
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping range Interface Length A Size Downloads metric/ inch
40.720.16.3 short 3,175-9,525 CAT40 70 mm ER16
Download after registration
40.720.25.3 short 3,175-15,875 CAT40 70 mm ER25
Download after registration
40.720.32.3 short 3,175-19,05 CAT40 70 mm ER32
Download after registration
40.721.16.3 long 3,175-9,525 CAT40 100 mm ER16
Download after registration
40.721.25.3 long 3,175-15,875 CAT40 100 mm ER25
Download after registration
40.721.32.3 long 3,175-19,05 CAT40 100 mm ER32
Download after registration
40.722.16.3 oversize (160 mm) 3,175-9,525 CAT40 160 mm ER16
Download after registration
40.722.25.3 oversize (160 mm) 3,175-15,875 CAT40 160 mm ER25
Download after registration
40.722.32.3 oversize (160 mm) 3,175-19,05 CAT40 160 mm ER32
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter