Characteristics
Applications
Areas of application-material
Description
HAIMER MILL - F2014KK Chamfer, short
Solid carbide end mill
Quality pass
Shank tolerance h6
Runout < 0.0004" (10 µm)
Universal solid carbide end mill for a broad range of applications
- Shank tolerance: h6
- Center cutting
- Unequal Helix
- Cutting length L1 max. 1.25 x D1
- No neck
- Runout < 10 µm (< 0.0004")
- Cost saving solid carbide shank length
- For almost all materials
- For roughing and finishing
- For ramping, drilling and slotting
- Especially suitable for small depths of engagement
Technical specifications
Notice
Technical data subject to change without prior notice.
| Description | Norm: Haimer | Value: metric/inch |
|---|---|---|
| Cutting edge diameter | D1 | 3,175 inch / 1/8 inch |
| D1 Tolerance | f9 | |
| Corner design | C | |
| Shank version | Weldon Schaft | |
| Helix angle | 37/39 ° | |
| HAIMER Material | D | |
| HAIMER Coating | A |
| Description | Norm: DIN 4000 | Value: metric/inch |
|---|---|---|
| Cutting diameter | A1 | 3,175 inch / 1/8 inch |
| Mass (weight) | D7 | 0,014 kg |
| Description | Norm: ISO 13399 | Value: metric/inch |
|---|---|---|
| Weight | WT | 0,014 kg |
Characteristics
Cutting length 1.25 x Ø
Corner chamfer 45°
Teeth 4
Helix angle 37/39°
Straight shank (HA)
Weldon (HB)
Applications
- For almost all materials
- For roughing and finishing
- For ramping, drilling and slotting
- Especially suitable for small depths of engagement
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
FURTHER AREAS OF APPLICATION
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping, Drilling)
Ramping
Slotting
Side milling
Drilling
Cooling
Emulsion
Cold air
Dry machining
Minimal lubrication