back

Shrink Fit Chuck Standard Version with Cool Jet, similar JIS B 6339-2, BT40 with face contact

Shrink Fit Chuck Standard Version similar JIS B 6339-2 · BT40 with face contact
Technical drawing Shrink Fit Chuck Standard Version similar JIS B 6339-2 · BT40 with face contact
Shrink Fit Chuck Standard Version similar JIS B 6339-2 · BT40 with face contact
Technical drawing Shrink Fit Chuck Standard Version similar JIS B 6339-2 · BT40 with face contact
Order number: 40P.640.14.2
Clamping diameter
A-length version
Upgrade
Shrink Fit Chuck Standard Version with Cool Jet, similar JIS B 6339-2, BT40 with face contact
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
Taper tolerance AT3
Coolant supply form JD
Shrink fit chuck suitable to all kind of shrink fit units.
Similar JIS B 6339-2 BT40 with face contact form JD.
Form JD means: interior coolant supply through centre.
  • Additional support on the flange surface for more rigidity
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version with Cool Jet, similar JIS B 6339-2, BT40 with face contact
asset-115359-907
Description Norm: Value: metric/ inch
Clamping diameter D1 0.551 inch
Length A A 3.543 inch
A-length version short
Diameter 2 D2 1.063 inch
Diameter 3 D3 1.339 inch
Length L 1.85 inch
Interface BT40 with Face Contact
Upgrade with Cool Jet
Mass (weight) D7 3.045 lbs
coolant exit style code H22 3
Company identification J3 HAI
Weight WT 3.045 lbs
coolant exit style code CXSC 3
Company identification COMPC HAI
Shrink Fit Chuck Standard Version with Cool Jet, similar JIS B 6339-2, BT40 with face contact
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
Taper tolerance AT3
Coolant supply form JD
Shrink fit chuck suitable to all kind of shrink fit units.
Similar JIS B 6339-2 BT40 with face contact form JD.
Form JD means: interior coolant supply through centre.
  • Additional support on the flange surface for more rigidity
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version with Cool Jet, similar JIS B 6339-2, BT40 with face contact
asset-115359-907
Description Norm: Value: metric/ inch
Clamping diameter D1 0.551 inch
Length A A 3.543 inch
A-length version short
Diameter 2 D2 1.063 inch
Diameter 3 D3 1.339 inch
Length L 1.85 inch
Interface BT40 with Face Contact
Upgrade with Cool Jet
Mass (weight) D7 3.045 lbs
coolant exit style code H22 3
Company identification J3 HAI
Weight WT 3.045 lbs
coolant exit style code CXSC 3
Company identification COMPC HAI
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Upgrade Downloads metric/ inch
40P.640.03 short 0.118 inch BT40 with Face Contact 3.543 inch with slits
Download after registration
40P.640.03.1 short 0.118 inch BT40 with Face Contact 3.543 inch
40P.640.04 short 0.157 inch BT40 with Face Contact 3.543 inch with slits
Download after registration
40P.640.04.1 short 0.157 inch BT40 with Face Contact 3.543 inch
40P.640.05 short 0.197 inch BT40 with Face Contact 3.543 inch with slits
Download after registration
40P.640.05.1 short 0.197 inch BT40 with Face Contact 3.543 inch
40P.640.06 short 0.236 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.06.2 short 0.236 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.08 short 0.315 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.08.2 short 0.315 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.1/2Z.4 short 1/2 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.1/4Z.4 short 1/4 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.1/8Z short 1/8 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.10 short 0.394 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.10.2 short 0.394 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.11/4Z.4 short 1 1/4 inch BT40 with Face Contact 3.937 inch with Cool Jet
Download after registration
40P.640.12 short 0.472 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.12.2 short 0.472 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.14 short 0.551 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.14.2 short 0.551 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.16 short 0.63 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.16.2 short 0.63 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.18 short 0.709 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.1Z.4 short 1 inch BT40 with Face Contact 3.937 inch with Cool Jet
Download after registration
40P.640.20 short 0.787 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.20.2 short 0.787 inch BT40 with Face Contact 3.543 inch with Cool Jet
40P.640.25 short 0.984 inch BT40 with Face Contact 3.937 inch
Download after registration
40P.640.25.2 short 0.984 inch BT40 with Face Contact 3.937 inch with Cool Jet
40P.640.3/16Z short 3/16 inch BT40 with Face Contact 3.543 inch
Download after registration
40P.640.3/4Z.4 short 3/4 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.3/8Z.4 short 3/8 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.32 short 1.26 inch BT40 with Face Contact 3.937 inch
Download after registration
40P.640.5/16Z.4 short 5/16 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.5/8Z.4 short 5/8 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.7/16Z.4 short 7/16 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.640.7/8Z.4 short 7/8 inch BT40 with Face Contact 3.543 inch with Cool Jet
Download after registration
40P.642.06 oversize (160 mm) 0.236 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.08 oversize (160 mm) 0.315 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.1/2Z.4 oversize (160 mm) 1/2 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.1/4Z.4 oversize (160 mm) 1/4 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.10 oversize (160 mm) 0.394 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.11/4Z.4 oversize (160 mm) 1 1/4 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.12 oversize (160 mm) 0.472 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.14 oversize (160 mm) 0.551 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.16 oversize (160 mm) 0.63 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.18 oversize (160 mm) 0.709 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.1Z.4 oversize (160 mm) 1 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.20 oversize (160 mm) 0.787 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.25 oversize (160 mm) 0.984 inch BT40 with Face Contact 6.299 inch
Download after registration
40P.642.3/4Z.4 oversize (160 mm) 3/4 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.3/8Z.4 oversize (160 mm) 3/8 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.5/16Z.4 oversize (160 mm) 5/16 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.5/8Z.4 oversize (160 mm) 5/8 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.7/16Z.4 oversize (160 mm) 7/16 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.642.7/8Z.4 oversize (160 mm) 7/8 inch BT40 with Face Contact 6.299 inch with Cool Jet
40P.644.06 AL130 0.236 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.08 AL130 0.315 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.1/2Z.4 AL130 1/2 inch BT40 with Face Contact 5.118 inch with Cool Jet
Download after registration
40P.644.1/4Z.4 AL130 1/4 inch BT40 with Face Contact 5.118 inch with Cool Jet
Download after registration
40P.644.10 AL130 0.394 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.11/4Z.4 AL130 1 1/4 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.12 AL130 0.472 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.14 AL130 0.551 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.16 AL130 0.63 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.18 AL130 0.709 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.1Z.4 AL130 1 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.20 AL130 0.787 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.25 AL130 0.984 inch BT40 with Face Contact 5.118 inch
Download after registration
40P.644.3/4Z.4 AL130 3/4 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.3/8Z.4 AL130 3/8 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.5/16Z.4 AL130 5/16 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.5/8Z.4 AL130 5/8 inch BT40 with Face Contact 5.118 inch with Cool Jet
40P.644.7/16Z.4 AL130 7/16 inch BT40 with Face Contact 5.118 inch with Cool Jet
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter