back

Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A63/80

Taper HSK-A63/Flange 80 mm
Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A63/80
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A63/80
Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A63/80
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A63/80
Order number:
Clamping diameter
A-length version
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A63/80
Taper HSK-A63/Flange 80 mm
Quality pass
Chuck body fine balanced G2.5 33.000 1/min or U
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Incl. pocket for data chip
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A63/80
asset-112414-779
Description Norm: Value: metric/ inch
Clamping diameter D1 0.236 inch
Length A A 5.118 inch
A-length version AL130
Diameter 2 D2 0.827 inch
Diameter 3 D3 1.063 inch
Length L 1.417 inch
Interface HSK-A63/80
Mass (weight) D7 4.064 lbs
Flange diameter A4 3.15 inch
Hand E1 N
Company identification J3 HAI
Weight WT 4.064 lbs
Flange diameter DF 3.15 inch
Hand HAND N
Company identification COMPC HAI
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A63/80
Taper HSK-A63/Flange 80 mm
Quality pass
Chuck body fine balanced G2.5 33.000 1/min or U
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Incl. pocket for data chip
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A63/80
asset-112414-779
Description Norm: Value: metric/ inch
Clamping diameter D1 0.236 inch
Length A A 5.118 inch
A-length version AL130
Diameter 2 D2 0.827 inch
Diameter 3 D3 1.063 inch
Length L 1.417 inch
Interface HSK-A63/80
Mass (weight) D7 4.064 lbs
Flange diameter A4 3.15 inch
Hand E1 N
Company identification J3 HAI
Weight WT 4.064 lbs
Flange diameter DF 3.15 inch
Hand HAND N
Company identification COMPC HAI
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Downloads metric/ inch
A63/80.144.06 AL130 0.236 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.08 AL130 0.315 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.1/2Z.I AL130 1/2 inch HSK-A63/80 5 inch
Download after registration
A63/80.144.1/4Z.I AL130 1/4 inch HSK-A63/80 5 inch
Download after registration
A63/80.144.10 AL130 0.394 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.12 AL130 0.472 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.14 AL130 0.551 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.16 AL130 0.63 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.18 AL130 0.709 inch HSK-A63/80 5.118 inch
Download after registration
A63/80.144.3/8Z.I AL130 3/8 inch HSK-A63/80 5 inch
Download after registration
A63/80.144.5/16Z.I AL130 5/16 inch HSK-A63/80 5 inch
Download after registration
A63/80.144.5/8Z.I AL130 5/8 inch HSK-A63/80 5 inch
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter