back

Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A40

Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A40
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A40
Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A40
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A40
Order number: A40.140.06
Clamping diameter
A-length version
Upgrade
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A40
Quality pass
Chuck body fine balanced U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1 and version similar to DIN 69882-8.
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A40
asset-113723-772
Description Norm: Value: metric/ inch
Clamping diameter D1 0.236 inch
Length A A 3.15 inch
A-length version short
Diameter 2 D2 0.827 inch
Diameter 3 D3 1.063 inch
Length L 1.417 inch
Interface HSK-A40
Mass (weight) D7 0.926 lbs
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 1.063 inch
Flange diameter A4 1.575 inch
Interference diameter A6 0.827 inch
Length body diameter 1 B1 2.362 inch
Protruding length B3 3.15 inch
Overall length B4 3.937 inch
Taper angle B51 4,5 °
Functional length B71 1.732 inch
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0400
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0060
Connection diameter min C71 6
Clamping length max. / nominal length C81 1.417 inch
Clamping length, min., workpiece side C82 1.063 inch
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 ZYL00600115
interface code to machine side J6 HSK04000115
Weight WT 0.926 lbs
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 1.063 inch
Flange diameter DF 1.575 inch
Interference diameter DCINTF 0.827 inch
Length body diameter 1 LBD1 2.362 inch
Protruding length LPR 3.15 inch
Overall length OAL 3.937 inch
Taper angle TA 4,5 °
Functional length LF 1.732 inch
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0060
Connection diameter min DCONN 6
Clamping length max. / nominal length LSCX 1.417 inch
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A40
Quality pass
Chuck body fine balanced U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1 and version similar to DIN 69882-8.
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A40
asset-113723-772
Description Norm: Value: metric/ inch
Clamping diameter D1 0.236 inch
Length A A 3.15 inch
A-length version short
Diameter 2 D2 0.827 inch
Diameter 3 D3 1.063 inch
Length L 1.417 inch
Interface HSK-A40
Mass (weight) D7 0.926 lbs
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 1.063 inch
Flange diameter A4 1.575 inch
Interference diameter A6 0.827 inch
Length body diameter 1 B1 2.362 inch
Protruding length B3 3.15 inch
Overall length B4 3.937 inch
Taper angle B51 4,5 °
Functional length B71 1.732 inch
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0400
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0060
Connection diameter min C71 6
Clamping length max. / nominal length C81 1.417 inch
Clamping length, min., workpiece side C82 1.063 inch
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 ZYL00600115
interface code to machine side J6 HSK04000115
Weight WT 0.926 lbs
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 1.063 inch
Flange diameter DF 1.575 inch
Interference diameter DCINTF 0.827 inch
Length body diameter 1 LBD1 2.362 inch
Protruding length LPR 3.15 inch
Overall length OAL 3.937 inch
Taper angle TA 4,5 °
Functional length LF 1.732 inch
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0060
Connection diameter min DCONN 6
Clamping length max. / nominal length LSCX 1.417 inch
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Upgrade Downloads metric/ inch
A40.140.03 short 0.118 inch HSK-A40 2.362 inch with slits
Download after registration
A40.140.04 short 0.157 inch HSK-A40 2.362 inch with slits
Download after registration
A40.140.05 short 0.197 inch HSK-A40 2.362 inch with slits
Download after registration
A40.140.06 short 0.236 inch HSK-A40 3.15 inch
Download after registration
A40.140.08 short 0.315 inch HSK-A40 3.15 inch
Download after registration
A40.140.1/2Z short 1/2 inch HSK-A40 3.543 inch
Download after registration
A40.140.1/4Z short 1/4 inch HSK-A40 3.15 inch
Download after registration
A40.140.1/8Z short 1/8 inch HSK-A40 2.362 inch
Download after registration
A40.140.10 short 0.394 inch HSK-A40 3.15 inch
Download after registration
A40.140.12 short 0.472 inch HSK-A40 3.543 inch
Download after registration
A40.140.14 short 0.551 inch HSK-A40 3.543 inch
Download after registration
A40.140.16 short 0.63 inch HSK-A40 3.543 inch
Download after registration
A40.140.3/16Z short 3/16 inch HSK-A40 2.362 inch
Download after registration
A40.140.3/8Z short 3/8 inch HSK-A40 3.15 inch
Download after registration
A40.140.5/8Z short 5/8 inch HSK-A40 3.543 inch
Download after registration
A40.140.7/16Z short 7/16 inch HSK-A40 3.15 inch
A40.147.03.1 AL120 0.118 inch HSK-A40 4.724 inch
Download after registration
A40.147.04.1 AL120 0.157 inch HSK-A40 4.724 inch
Download after registration
A40.147.05.1 AL120 0.197 inch HSK-A40 4.724 inch
Download after registration
A40.147.06 AL120 0.236 inch HSK-A40 4.724 inch
Download after registration
A40.147.08 AL120 0.315 inch HSK-A40 4.724 inch
Download after registration
A40.147.10 AL120 0.394 inch HSK-A40 4.724 inch
Download after registration
A40.147.12 AL120 0.472 inch HSK-A40 4.724 inch
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter