Reduction sleeves allow clamping of several different shank diameters with just one tool holder.
The reduction sleeves with Safe-Lock can be used in HAIMER Power Hydraulic Chucks to clamp tools with Safe-Lock shanks. The tools are protected against pull out by the additional form lock. The reduction sleeve is screwed into the hydraulic chuck and tightened to also be secured against pull out.
Included in delivery: with back-up screw (Order No. 85.810.15.3)
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 0.472 inch |
| Diameter 2 | D2 | 1.26 inch |
| Length 1 | L1 | 2.362 inch |
| Length 2 | L2 | 1.772 inch |
| Thread 1 | G1 | M6 |
| Thread | G2 | M16x1 |
Reduction sleeves allow clamping of several different shank diameters with just one tool holder.
The reduction sleeves with Safe-Lock can be used in HAIMER Power Hydraulic Chucks to clamp tools with Safe-Lock shanks. The tools are protected against pull out by the additional form lock. The reduction sleeve is screwed into the hydraulic chuck and tightened to also be secured against pull out.
Included in delivery: with back-up screw (Order No. 85.810.15.3)
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 0.472 inch |
| Diameter 2 | D2 | 1.26 inch |
| Length 1 | L1 | 2.362 inch |
| Length 2 | L2 | 1.772 inch |
| Thread 1 | G1 | M6 |
| Thread | G2 | M16x1 |
| Order No. | Clamping diameter | Length 1 | Downloads | metric/ inch |
|---|---|---|---|---|
| 76.323.12.27.BG | 0.472 inch | 2.362 inch |
|
|
| 76.323.16.27.BG | 0.63 inch | 2.362 inch |
|
|
| 76.323.20.27.BG | 0.787 inch | 2.362 inch |
|
|
| 76.323.25.27.BG | 0.984 inch | 2.362 inch |
|
