Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons.
Pull studs ISO 7388-3 Form JD with drill through former norm MAS 403 30°/45°
Pull studs ISO 7388-3 Form JD with drill through former norm MAS 403 30°/45°
Quality pass
Original HAIMER accessory
- Made of special steel with high rigidity
- Costly heat treatment in several steps
- Spots with highest stress tempered specifically
- High impact strength
- All functional surfaces fine finished after hardening.
- Highest security and reliability
Pull studs ISO 7388-3 Form JD with drill through former norm MAS 403 30°/45°
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Version | BT40 - 45° | |
| Diameter 1 | D1 | 0.591 inch |
| Diameter 2 | D2 | 0.394 inch |
| Diameter 3 | D3 | 0.669 inch |
| Length 1 | L1 | 2.362 inch |
| Length 2 | L2 | 1.378 inch |
| Length 3 | L3 | 1.102 inch |
| Thread 1 | g1 | M16 |
| Angle alpha | α | 45° |
Description
Pull studs ISO 7388-3 Form JD with drill through former norm MAS 403 30°/45°
Quality pass
Original HAIMER accessory
Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons.
- Made of special steel with high rigidity
- Costly heat treatment in several steps
- Spots with highest stress tempered specifically
- High impact strength
- All functional surfaces fine finished after hardening.
- Highest security and reliability
Technical specifications
Pull studs ISO 7388-3 Form JD with drill through former norm MAS 403 30°/45°
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Version | BT40 - 45° | |
| Diameter 1 | D1 | 0.591 inch |
| Diameter 2 | D2 | 0.394 inch |
| Diameter 3 | D3 | 0.669 inch |
| Length 1 | L1 | 2.362 inch |
| Length 2 | L2 | 1.378 inch |
| Length 3 | L3 | 1.102 inch |
| Thread 1 | g1 | M16 |
| Angle alpha | α | 45° |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Version | Downloads | metric/ inch |
|---|---|---|---|
| 88.600.30 | BT30 - 45° |
Download after registration
|
|
| 88.603.40 | BT40 - 45° |
Download after registration
|
|
| 88.603.50 | BT50 - 45° |
Download after registration
|
|
| 88.605.30 | BT30 - 30° |
Download after registration
|
|
| 88.605.40 | BT40 - 30° |
Download after registration
|
|
| 88.605.50 | BT50 - 30° |
Download after registration
|
|
| 88.613.40 | BT40 - 45° |
Download after registration
|
|
| 88.613.50 | BT50 - 45° |
Download after registration
|
|
| 88.615.40 | BT40 - 30° |
Download after registration
|
|
| 88.615.50 | BT50 - 30° |
Download after registration
|
|
| 88.623.40 | BT40 - 45° |
Download after registration
|
|
| 88.623.50 | BT50 - 45° |
Download after registration
|
|
| 88.625.40 | BT40 - 30° |
Download after registration
|
|
| 88.625.50 | BT50 - 30° |
Download after registration
|
|
| 88.627.40 | BT40 - 45° |
Download after registration
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001