back

Power Shrink Chuck with Safe-Lock, DIN 69893-1, HSK-A125

Technical drawing Power Shrink Chuck DIN 69893-1 · HSK-A125
Technical drawing Power Shrink Chuck DIN 69893-1 · HSK-A125
Order number: A125.146.12.37
Clamping diameter
A-length version
Upgrade
Power Shrink Chuck with Safe-Lock, DIN 69893-1, HSK-A125
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Cool Jet, can be sealed
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times
  • Quieter running, therefore better surface quality and protection of tools, spindles and machines
  • Higher machining accuracy
  • With dirt groove in the clamping bore
  • With threaded holes in order to balance with balancing screws
  • Cool Jet bores that can be sealed included
  • Thread M3, 2 bores
  • Higher coolant flow rate due to optimized coolant bores
  • Safe-Lock pull out protection included
  • High rigidity
  • Slim at the tip
  • Dampen vibrations
  • High clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
Scope of Delivery
  • With backup screw
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock (optional)
Machining example Power Shrink Cuck
  • Milling - Ø: 16 mm; n = 13.000 1/min, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Power Shrink Chuck with Safe-Lock, DIN 69893-1, HSK-A125
asset-115051-801
Description Norm: Value: metric/ inch
Clamping diameter D1 0.472 inch
Length A A 7.874 inch
A-length version ZG200
Diameter 2 D2 1.063 inch
Diameter 3 D3 4.291 inch
Length L 1.85 inch
Interface HSK-A125
Upgrade with Safe-Lock and Cool Jet
Mass (weight) D7 7,741 kg
Flange diameter A4 4.921 inch
Hand E1 N
Company identification J3 HAI
interface code to machine side J6 HSK12500115
Weight WT 7,741 kg
Flange diameter DF 4.921 inch
Hand HAND N
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
Power Shrink Chuck with Safe-Lock, DIN 69893-1, HSK-A125
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Cool Jet, can be sealed
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
  • Shorter processing times
  • Quieter running, therefore better surface quality and protection of tools, spindles and machines
  • Higher machining accuracy
  • With dirt groove in the clamping bore
  • With threaded holes in order to balance with balancing screws
  • Cool Jet bores that can be sealed included
  • Thread M3, 2 bores
  • Higher coolant flow rate due to optimized coolant bores
  • Safe-Lock pull out protection included
  • High rigidity
  • Slim at the tip
  • Dampen vibrations
  • High clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
Scope of Delivery
  • With backup screw
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock (optional)
Machining example Power Shrink Cuck
  • Milling - Ø: 16 mm; n = 13.000 1/min, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Power Shrink Chuck with Safe-Lock, DIN 69893-1, HSK-A125
asset-115051-801
Description Norm: Value: metric/ inch
Clamping diameter D1 0.472 inch
Length A A 7.874 inch
A-length version ZG200
Diameter 2 D2 1.063 inch
Diameter 3 D3 4.291 inch
Length L 1.85 inch
Interface HSK-A125
Upgrade with Safe-Lock and Cool Jet
Mass (weight) D7 7,741 kg
Flange diameter A4 4.921 inch
Hand E1 N
Company identification J3 HAI
interface code to machine side J6 HSK12500115
Weight WT 7,741 kg
Flange diameter DF 4.921 inch
Hand HAND N
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Upgrade Downloads metric/ inch
A125.140.1/2Z.3.I AL130 1/2 inch HSK-A125 5 inch with Cool Jet
Download after registration
A125.140.1/2Z.37.I AL130 1/2 inch HSK-A125 5 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.10.3 AL130 0.394 inch HSK-A125 5.118 inch with Cool Jet
Download after registration
A125.140.10.37 AL130 0.394 inch HSK-A125 5.118 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.12.3 AL130 0.472 inch HSK-A125 5.118 inch with Cool Jet
Download after registration
A125.140.12.37 AL130 0.472 inch HSK-A125 5.118 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.16.3 AL130 0.63 inch HSK-A125 5.118 inch with Cool Jet
Download after registration
A125.140.16.37 AL130 0.63 inch HSK-A125 5.118 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.1Z.3.I AL130 1 inch HSK-A125 5 inch with Cool Jet
Download after registration
A125.140.1Z.37.I AL130 1 inch HSK-A125 5 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.20.3 AL130 0.787 inch HSK-A125 5.118 inch with Cool Jet
Download after registration
A125.140.20.37 AL130 0.787 inch HSK-A125 5.118 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.25.3 AL130 0.984 inch HSK-A125 5.118 inch with Cool Jet
Download after registration
A125.140.25.37 AL130 0.984 inch HSK-A125 5.118 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.3/4Z.3.I AL130 3/4 inch HSK-A125 5 inch with Cool Jet
Download after registration
A125.140.3/4Z.37.I AL130 3/4 inch HSK-A125 5 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.3/8Z.3.I AL130 3/8 inch HSK-A125 5 inch with Cool Jet
Download after registration
A125.140.3/8Z.37.I AL130 3/8 inch HSK-A125 5 inch with Safe-Lock and Cool Jet
Download after registration
A125.140.5/8Z.3.I AL130 5/8 inch HSK-A125 5 inch with Cool Jet
Download after registration
A125.140.5/8Z.37.I AL130 5/8 inch HSK-A125 5 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.1/2Z.3.I oversize (160 mm) 1/2 inch HSK-A125 7 inch with Cool Jet
Download after registration
A125.142.1/2Z.37.I oversize (160 mm) 1/2 inch HSK-A125 7 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.10.3 oversize (160 mm) 0.394 inch HSK-A125 6.299 inch with Cool Jet
Download after registration
A125.142.10.37 oversize (160 mm) 0.394 inch HSK-A125 6.299 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.12.3 oversize (160 mm) 0.472 inch HSK-A125 6.299 inch with Cool Jet
Download after registration
A125.142.12.37 oversize (160 mm) 0.472 inch HSK-A125 6.299 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.16.3 oversize (160 mm) 0.63 inch HSK-A125 6.299 inch with Cool Jet
Download after registration
A125.142.16.37 oversize (160 mm) 0.63 inch HSK-A125 6.299 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.1Z.3.I oversize (160 mm) 1 inch HSK-A125 7 inch with Cool Jet
Download after registration
A125.142.1Z.37.I oversize (160 mm) 1 inch HSK-A125 7 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.20.3 oversize (160 mm) 0.787 inch HSK-A125 6.299 inch with Cool Jet
Download after registration
A125.142.20.37 oversize (160 mm) 0.787 inch HSK-A125 6.299 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.25.3 oversize (160 mm) 0.984 inch HSK-A125 6.299 inch with Cool Jet
Download after registration
A125.142.25.37 oversize (160 mm) 0.984 inch HSK-A125 6.299 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.3/4Z.3.I oversize (160 mm) 3/4 inch HSK-A125 7 inch with Cool Jet
Download after registration
A125.142.3/4Z.37.I oversize (160 mm) 3/4 inch HSK-A125 7 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.3/8Z.3.I oversize (160 mm) 3/8 inch HSK-A125 7 inch with Cool Jet
Download after registration
A125.142.3/8Z.37.I oversize (160 mm) 3/8 inch HSK-A125 7 inch with Safe-Lock and Cool Jet
Download after registration
A125.142.5/8Z.3.I oversize (160 mm) 5/8 inch HSK-A125 7 inch with Cool Jet
Download after registration
A125.142.5/8Z.37.I oversize (160 mm) 5/8 inch HSK-A125 7 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.1/2Z.3.I ZG200 1/2 inch HSK-A125 9 inch with Cool Jet
Download after registration
A125.146.1/2Z.37.I ZG200 1/2 inch HSK-A125 9 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.10.3 ZG200 0.394 inch HSK-A125 7.874 inch with Cool Jet
Download after registration
A125.146.10.37 ZG200 0.394 inch HSK-A125 7.874 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.12.3 ZG200 0.472 inch HSK-A125 7.874 inch with Cool Jet
Download after registration
A125.146.12.37 ZG200 0.472 inch HSK-A125 7.874 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.16.3 ZG200 0.63 inch HSK-A125 7.874 inch with Cool Jet
Download after registration
A125.146.16.37 ZG200 0.63 inch HSK-A125 7.874 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.1Z.3.I ZG200 1 inch HSK-A125 9 inch with Cool Jet
Download after registration
A125.146.1Z.37.I ZG200 1 inch HSK-A125 9 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.20.3 ZG200 0.787 inch HSK-A125 7.874 inch with Cool Jet
Download after registration
A125.146.20.37 ZG200 0.787 inch HSK-A125 7.874 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.25.3 ZG200 0.984 inch HSK-A125 7.874 inch with Cool Jet
Download after registration
A125.146.25.37 ZG200 0.984 inch HSK-A125 7.874 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.3/4Z.3.I ZG200 3/4 inch HSK-A125 9 inch with Cool Jet
Download after registration
A125.146.3/4Z.37.I ZG200 3/4 inch HSK-A125 9 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.3/8Z.3.I ZG200 3/8 inch HSK-A125 9 inch with Cool Jet
Download after registration
A125.146.3/8Z.37.I ZG200 3/8 inch HSK-A125 9 inch with Safe-Lock and Cool Jet
Download after registration
A125.146.5/8Z.3.I ZG200 5/8 inch HSK-A125 9 inch with Cool Jet
Download after registration
A125.146.5/8Z.37.I ZG200 5/8 inch HSK-A125 9 inch with Safe-Lock and Cool Jet
Download after registration
Experience Haimer
Experience Haimer
At the Haimer Application Center
 Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
more information
Services
Services
Complaint and regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter