back

Power Shrink Chuck, DIN 69893-1, HSK-A80

Power Shrink Chuck DIN 69893-1 · HSK-A80
Power Shrink Chuck DIN 69893-1 · HSK-A80
Order number: A80.149.3/4Z.3.2142
Clamping diameter
A-length version
Power Shrink Chuck, DIN 69893-1, HSK-A80
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Without back-up screw for max. tool clamping depth
  • Optimised outer geometry and therefore perfect for blisk and blade machining
  • Increased machining capacity due to higher spindle speed, higher feed rates and larger cutting depth
  • Shorter processing times
  • Higher machining accuracy
  • With threaded holes in order to balance with balancing screws
  • Cool Jet bores that can be sealed included
  • High rigidity
  • Slim at the tip
  • Dampen vibrations
  • High clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request) Safe-Lock Pull out protection from Ø 8 mm on extra charge
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock (optional)
Machining example Power Shrink Cuck
  • Milling - Ø: 16 mm; n = 13.000 1/min, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Power Shrink Chuck, DIN 69893-1, HSK-A80
asset-120856-24094
Description Norm: Value: metric/ inch
Clamping diameter D1 3/4 inch
Length A A 6.299 inch
A-length version oversize (160 mm)
Diameter 2 D2 1.299 inch
Diameter 3 D3 2.559 inch
Length L 3.976 inch
Interface HSK-A80
Mass (weight) D7 8.15 lbs
Standard number of properties layout NSM DIN4000-89
Flange diameter A4 3.15 inch
Taper angle B51 4,5 °
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0800
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Balance grade D5 G2,5/25000
Rotation speed, max D6 25000
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 3
Company identification J3 HAI
interface code to machine side J6 HSK08000115
Weight WT 8.15 lbs
Standard number of properties layout NSM DIN4000-89
Flange diameter DF 3.15 inch
Taper angle TA 4,5 °
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 3
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
Power Shrink Chuck, DIN 69893-1, HSK-A80
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
  • Without back-up screw for max. tool clamping depth
  • Optimised outer geometry and therefore perfect for blisk and blade machining
  • Increased machining capacity due to higher spindle speed, higher feed rates and larger cutting depth
  • Shorter processing times
  • Higher machining accuracy
  • With threaded holes in order to balance with balancing screws
  • Cool Jet bores that can be sealed included
  • High rigidity
  • Slim at the tip
  • Dampen vibrations
  • High clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine
HAIMER TIP
For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request) Safe-Lock Pull out protection from Ø 8 mm on extra charge
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock (optional)
Machining example Power Shrink Cuck
  • Milling - Ø: 16 mm; n = 13.000 1/min, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Power Shrink Chuck, DIN 69893-1, HSK-A80
asset-120856-24094
Description Norm: Value: metric/ inch
Clamping diameter D1 3/4 inch
Length A A 6.299 inch
A-length version oversize (160 mm)
Diameter 2 D2 1.299 inch
Diameter 3 D3 2.559 inch
Length L 3.976 inch
Interface HSK-A80
Mass (weight) D7 8.15 lbs
Standard number of properties layout NSM DIN4000-89
Flange diameter A4 3.15 inch
Taper angle B51 4,5 °
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 0800
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Balance grade D5 G2,5/25000
Rotation speed, max D6 25000
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 3
Company identification J3 HAI
interface code to machine side J6 HSK08000115
Weight WT 8.15 lbs
Standard number of properties layout NSM DIN4000-89
Flange diameter DF 3.15 inch
Taper angle TA 4,5 °
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 3
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Downloads metric/ inch
A80.149.08.3.2140 short 0.315 inch HSK-A80 3.937 inch
Download after registration
A80.149.08.3.2142 oversize (160 mm) 0.315 inch HSK-A80 6.299 inch
Download after registration
A80.149.08.3.2144 AL130 0.315 inch HSK-A80 5.118 inch
Download after registration
A80.149.1/2Z.3.2140 short 1/2 inch HSK-A80 3.937 inch
Download after registration
A80.149.1/2Z.3.2142 oversize (160 mm) 1/2 inch HSK-A80 6.299 inch
Download after registration
A80.149.1/2Z.3.2144 AL130 1/2 inch HSK-A80 5.118 inch
Download after registration
A80.149.10.3.2140 short 0.394 inch HSK-A80 3.937 inch
Download after registration
A80.149.10.3.2142 oversize (160 mm) 0.394 inch HSK-A80 6.299 inch
Download after registration
A80.149.10.3.2144 AL130 0.394 inch HSK-A80 5.118 inch
Download after registration
A80.149.12.3.2140 short 0.472 inch HSK-A80 3.937 inch
Download after registration
A80.149.12.3.2142 oversize (160 mm) 0.472 inch HSK-A80 6.299 inch
Download after registration
A80.149.12.3.2144 AL130 0.472 inch HSK-A80 5.118 inch
Download after registration
A80.149.16.3.2140 short 0.63 inch HSK-A80 3.937 inch
Download after registration
A80.149.16.3.2142 oversize (160 mm) 0.63 inch HSK-A80 6.299 inch
Download after registration
A80.149.16.3.2144 AL130 0.63 inch HSK-A80 5.118 inch
Download after registration
A80.149.20.3.2140 short 0.787 inch HSK-A80 3.937 inch
Download after registration
A80.149.20.3.2142 oversize (160 mm) 0.787 inch HSK-A80 6.299 inch
Download after registration
A80.149.20.3.2144 AL130 0.787 inch HSK-A80 5.118 inch
Download after registration
A80.149.3/4Z.3.2140 short 3/4 inch HSK-A80 3.937 inch
Download after registration
A80.149.3/4Z.3.2142 oversize (160 mm) 3/4 inch HSK-A80 6.299 inch
Download after registration
A80.149.3/4Z.3.2144 AL130 3/4 inch HSK-A80 5.118 inch
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter