back

HAIMER MILL Power Series - F1304NN Chamfer rough toothing

Solid carbide end mill
Characteristics
Corner chamfer 45° Corner chamfer 45°
Teeth 4 Teeth 4
Helix angle 32/34° Helix angle 32/34°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Applications
Feed direction (Side milling, Ramping) Feed direction (Side milling, Ramping)
Ramping 3-5° Ramping 3-5°
Slotting Slotting
Side milling Side milling
Areas of application-material
P Steel
M Stainless steel
K Cast iron
S High temperature alloys and titanium alloys
N NF metals
Order number: F1304NNL1/4ZCAA
Cutting edge diameter
Shank version
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")

Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.

  • Shank tolerance: h5
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Unequal Helix
  • Fine balanced < 1 gmm
  • For low power machines
  • Runout < 5 µm (< 0.0002")
  • Polished gullets
  • For almost all materials
  • For roughing
  • For improved chip removal
  • For reduced cutting forces
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
  • Pullout protection with length adjustment
  • Highly precise runout accuracy of < 3 μm at 3 × D
  • No pullout or rotation of the cutting tool
  • Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
  • Top quality at each delivery
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
asset-118144-1438
Description Norm: Value: metric/ inch
D1 Tolerance h9
Corner design C
Shank version Safe-λock®
Helix angle 32/34 °
HAIMER Material A
HAIMER Coating A
Mass (weight) D7 0.057 lbs
Standard number of properties layout NSM DIN4000-82
Company identification J3 HAI
Weight WT 0.057 lbs
Characteristics
Corner chamfer 45° Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4 Teeth 4
Teeth 4
Teeth 4
Helix angle 32/34° Helix angle 32/34°
Helix angle 32/34°
Helix angle 32/34°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
  • For almost all materials
  • For roughing
  • For improved chip removal
  • For reduced cutting forces
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
FURTHER AREAS OF APPLICATION
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 3-5°
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
Download (pdf | 136.5 KB) show online
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")

Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.

  • Shank tolerance: h5
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Unequal Helix
  • Fine balanced < 1 gmm
  • For low power machines
  • Runout < 5 µm (< 0.0002")
  • Polished gullets
  • For almost all materials
  • For roughing
  • For improved chip removal
  • For reduced cutting forces
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
  • Pullout protection with length adjustment
  • Highly precise runout accuracy of < 3 μm at 3 × D
  • No pullout or rotation of the cutting tool
  • Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
  • Top quality at each delivery
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
asset-118144-1438
Description Norm: Value: metric/ inch
D1 Tolerance h9
Corner design C
Shank version Safe-λock®
Helix angle 32/34 °
HAIMER Material A
HAIMER Coating A
Mass (weight) D7 0.057 lbs
Standard number of properties layout NSM DIN4000-82
Company identification J3 HAI
Weight WT 0.057 lbs
Characteristics
Corner chamfer 45° Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4 Teeth 4
Teeth 4
Teeth 4
Helix angle 32/34° Helix angle 32/34°
Helix angle 32/34°
Helix angle 32/34°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
  • For almost all materials
  • For roughing
  • For improved chip removal
  • For reduced cutting forces
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
FURTHER AREAS OF APPLICATION
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 3-5°
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER MILL Power Series - F1304NN Chamfer rough toothing
Download (pdf | 136.5 KB) show online
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. Chamfer size Corner design Cutting edge diameter HAIMER Coating Length of cutting edge Number of cutting edges Shank diameter Shank version Downloads metric/ inch
F1304NNB0600CAA 0.008 inch C 0.236 inch A 0.512 inch 4 0.236 inch Weldon shank
Download after registration
F1304NNB0800CAA 0.008 inch C 0.315 inch A 3/4 inch 4 0.315 inch Weldon shank
Download after registration
F1304NNB1000CAA 0.012 inch C 0.394 inch A 0.866 inch 4 0.394 inch Weldon shank
Download after registration
F1304NNB1200CAA 0.012 inch C 0.472 inch A 1.024 inch 4 0.472 inch Weldon shank
Download after registration
F1304NNB1400CAA 0.016 inch C 0.551 inch A 1.024 inch 4 0.551 inch Weldon shank
Download after registration
F1304NNB1600CAA 0.02 inch C 0.63 inch A 1.26 inch 4 0.63 inch Weldon shank
Download after registration
F1304NNB1800CAA 0.02 inch C 0.709 inch A 1.26 inch 4 0.709 inch Weldon shank
Download after registration
F1304NNB2000CAA 0.024 inch C 0.787 inch A 1.496 inch 4 0.787 inch Weldon shank
Download after registration
F1304NNH0600CAA 0.008 inch C 0.236 inch A 0.512 inch 4 0.236 inch Straight shank
Download after registration
F1304NNH0800CAA 0.008 inch C 0.315 inch A 3/4 inch 4 0.315 inch Straight shank
Download after registration
F1304NNH1000CAA 0.012 inch C 0.394 inch A 0.866 inch 4 0.394 inch Straight shank
Download after registration
F1304NNH1200CAA 0.012 inch C 0.472 inch A 1.024 inch 4 0.472 inch Straight shank
Download after registration
F1304NNH1400CAA 0.016 inch C 0.551 inch A 1.024 inch 4 0.551 inch Straight shank
Download after registration
F1304NNH1600CAA 0.02 inch C 0.63 inch A 1.26 inch 4 0.63 inch Straight shank
Download after registration
F1304NNH1800CAA 0.02 inch C 0.709 inch A 1.26 inch 4 0.709 inch Straight shank
Download after registration
F1304NNH2000CAA 0.024 inch C 0.787 inch A 1.496 inch 4 0.787 inch Straight shank
Download after registration
F1304NNL0600CAA 0.008 inch C 0.236 inch A 0.512 inch 4 0.236 inch Safe-λock®
Download after registration
F1304NNL0800CAA 0.008 inch C 0.315 inch A 3/4 inch 4 0.315 inch Safe-λock®
Download after registration
F1304NNL1/2ZCAA C A Safe-λock®
F1304NNL1/4ZCAA C A Safe-λock®
F1304NNL1000CAA 0.012 inch C 0.394 inch A 0.866 inch Safe-λock®
Download after registration
F1304NNL1200CAA 0.012 inch C 0.472 inch A 1.024 inch 4 0.472 inch Safe-λock®
Download after registration
F1304NNL1400CAA 0.016 inch C 0.551 inch A 1.024 inch 4 0.551 inch Safe-λock®
Download after registration
F1304NNL1600CAA 0.02 inch C 0.63 inch A 1.26 inch 4 0.63 inch Safe-λock®
Download after registration
F1304NNL1800CAA 0.02 inch C 0.709 inch A 1.26 inch 4 0.709 inch Safe-λock®
Download after registration
F1304NNL1ZCAA C A Safe-λock®
Download after registration
F1304NNL2000CAA 0.024 inch C 0.787 inch A 1.496 inch 4 0.787 inch Safe-λock®
Download after registration
F1304NNL3/4ZCAA C A Safe-λock®
F1304NNL3/8ZCAA C A Safe-λock®
F1304NNL5/16ZCAA C A Safe-λock®
F1304NNL5/8ZCAA C A Safe-λock®
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter