back

HAIMER MILL Power Series - F1003NN Sharp cutting edge

Solid carbide end mill
Characteristics
Sharp cutting edge Sharp cutting edge
Teeth 3 Teeth 3
Helix angle 35/36/37° Helix angle 35/36/37°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Applications
Feed direction (Side milling, Ramping, Drilling) Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5° Ramping 3-5°
Slotting Slotting
Side milling Side milling
Areas of application-material
P Steel
M Stainless steel
K Cast iron
S High temperature alloys and titanium alloys
N NF metals
H Hard materials
Order number: F1003NNL1/2ZSAA
Cutting edge diameter
Shank version
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")

Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.

  • Shank tolerance: h5
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Unequal Helix
  • Fine balanced < 1 gmm
  • Runout < 5 µm (< 0.0002")
  • Polished gullets
  • For almost all materials
  • For roughing and finishing
  • For sharp, right angled transitions
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
  • Pullout protection with length adjustment
  • Highly precise runout accuracy of < 3 μm at 3 × D
  • No pullout or rotation of the cutting tool
  • Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
  • Top quality at each delivery
HAIMER MILL Power Series - F1003NN Sharp cutting edge
asset-118758-1548
Description Norm: Value: metric/ inch
D1 Tolerance h9
Corner design S
Shank version Safe-λock®
Helix angle 35/36/37 °
HAIMER Material A
HAIMER Coating A
Helix angle F4 35/36/37 °
Mass (weight) D7 0.262 lbs
Standard number of properties layout NSM DIN4000-82
flute helix hand F3 R
Coating H5 A
Company identification J3 HAI
Weight WT 0.262 lbs
Characteristics
Sharp cutting edge Sharp cutting edge
Sharp cutting edge
Sharp cutting edge
Teeth 3 Teeth 3
Teeth 3
Teeth 3
Helix angle 35/36/37° Helix angle 35/36/37°
Helix angle 35/36/37°
Helix angle 35/36/37°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
  • For almost all materials
  • For roughing and finishing
  • For sharp, right angled transitions
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
FURTHER AREAS OF APPLICATION
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
H
Hard materials
Hardened steel, hardened cast iron materials, chilled cast iron
H
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Download (pdf | 143.7 KB) show online
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")

Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.

  • Shank tolerance: h5
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Unequal Helix
  • Fine balanced < 1 gmm
  • Runout < 5 µm (< 0.0002")
  • Polished gullets
  • For almost all materials
  • For roughing and finishing
  • For sharp, right angled transitions
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
  • Maximum pull-out protection
  • Best run-out accuracy
  • Maximum cutting volume
  • Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
  • Pullout protection with length adjustment
  • Highly precise runout accuracy of < 3 μm at 3 × D
  • No pullout or rotation of the cutting tool
  • Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
  • Top quality at each delivery
HAIMER MILL Power Series - F1003NN Sharp cutting edge
asset-118758-1548
Description Norm: Value: metric/ inch
D1 Tolerance h9
Corner design S
Shank version Safe-λock®
Helix angle 35/36/37 °
HAIMER Material A
HAIMER Coating A
Helix angle F4 35/36/37 °
Mass (weight) D7 0.262 lbs
Standard number of properties layout NSM DIN4000-82
flute helix hand F3 R
Coating H5 A
Company identification J3 HAI
Weight WT 0.262 lbs
Characteristics
Sharp cutting edge Sharp cutting edge
Sharp cutting edge
Sharp cutting edge
Teeth 3 Teeth 3
Teeth 3
Teeth 3
Helix angle 35/36/37° Helix angle 35/36/37°
Helix angle 35/36/37°
Helix angle 35/36/37°
Safe-Lock (S-λ) Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
  • For almost all materials
  • For roughing and finishing
  • For sharp, right angled transitions
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
FURTHER AREAS OF APPLICATION
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
H
Hard materials
Hardened steel, hardened cast iron materials, chilled cast iron
H
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Download (pdf | 143.7 KB) show online
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. Corner design Cutting edge diameter HAIMER Coating Length of cutting edge Number of cutting edges Shank diameter Shank version Downloads metric/ inch
F1003NNB0200SAA S 0.079 inch A 0.276 inch 3 0.236 inch Weldon shank
Download after registration
F1003NNB0300SAA S 0.118 inch A 0.315 inch 3 0.236 inch Weldon shank
Download after registration
F1003NNB0400SAA S 0.157 inch A 0.433 inch 3 0.236 inch Weldon shank
Download after registration
F1003NNB0500SAA S 0.197 inch A 0.512 inch 3 0.236 inch Weldon shank
Download after registration
F1003NNB0600SAA S 0.236 inch A 0.512 inch 3 0.236 inch Weldon shank
Download after registration
F1003NNB0800SAA S 0.315 inch A 3/4 inch 3 0.315 inch Weldon shank
Download after registration
F1003NNB1000SAA S 0.394 inch A 0.866 inch 3 0.394 inch Weldon shank
Download after registration
F1003NNB1200SAA S 0.472 inch A 1.024 inch 3 0.472 inch Weldon shank
Download after registration
F1003NNB1400SAA S 0.551 inch A 1.024 inch 3 0.551 inch Weldon shank
Download after registration
F1003NNB1600SAA S 0.63 inch A 1.26 inch 3 0.63 inch Weldon shank
Download after registration
F1003NNB1800SAA S 0.709 inch A 1.26 inch 3 0.709 inch Weldon shank
Download after registration
F1003NNB2000SAA S 0.787 inch A 1.496 inch 3 0.787 inch Weldon shank
Download after registration
F1003NNH0200SAA S 0.079 inch A 0.276 inch 3 0.236 inch Straight shank
Download after registration
F1003NNH0300SAA S 0.118 inch A 0.315 inch 3 0.236 inch Straight shank
Download after registration
F1003NNH0400SAA S 0.157 inch A 0.433 inch 3 0.236 inch Straight shank
Download after registration
F1003NNH0500SAA S 0.197 inch A 0.512 inch 3 0.236 inch Straight shank
Download after registration
F1003NNH0600SAA S 0.236 inch A 0.512 inch 3 0.236 inch Straight shank
Download after registration
F1003NNH0800SAA S 0.315 inch A 3/4 inch 3 0.315 inch Straight shank
Download after registration
F1003NNH1000SAA S 0.394 inch A 0.866 inch 3 0.394 inch Straight shank
Download after registration
F1003NNH1200SAA S 0.472 inch A 1.024 inch 3 0.472 inch Straight shank
Download after registration
F1003NNH1400SAA S 0.551 inch A 1.024 inch 3 0.551 inch Straight shank
Download after registration
F1003NNH1600SAA S 0.63 inch A 1.26 inch 3 0.63 inch Straight shank
Download after registration
F1003NNH1800SAA S 0.709 inch A 1.26 inch 3 0.709 inch Straight shank
Download after registration
F1003NNH2000SAA S 0.787 inch A 1.496 inch 3 0.787 inch Straight shank
Download after registration
F1003NNL0200SAA S 0.079 inch A 0.276 inch 3 0.236 inch Safe-λock®
Download after registration
F1003NNL0300SAA S 0.118 inch A 0.315 inch 3 0.236 inch Safe-λock®
Download after registration
F1003NNL0400SAA S 0.157 inch A 0.433 inch 3 0.236 inch Safe-λock®
Download after registration
F1003NNL0500SAA S 0.197 inch A 0.512 inch 3 0.236 inch Safe-λock®
Download after registration
F1003NNL0600SAA S 0.236 inch A 0.512 inch 3 0.236 inch Safe-λock®
Download after registration
F1003NNL0800SAA S 0.315 inch A 3/4 inch 3 0.315 inch Safe-λock®
Download after registration
F1003NNL1/2ZSAA S A Safe-λock®
F1003NNL1/4ZSAA S A Safe-λock®
F1003NNL1/8ZSAA S A Safe-λock®
F1003NNL1000SAA S 0.394 inch A 0.866 inch Safe-λock®
Download after registration
F1003NNL1200SAA S 0.472 inch A 1.024 inch 3 0.472 inch Safe-λock®
Download after registration
F1003NNL1400SAA S 0.551 inch A 1.024 inch 3 0.551 inch Safe-λock®
Download after registration
F1003NNL1600SAA S 0.63 inch A 1.26 inch 3 0.63 inch Safe-λock®
Download after registration
F1003NNL1800SAA S 0.709 inch A 1.26 inch 3 0.709 inch Safe-λock®
Download after registration
F1003NNL1ZSAA S A Safe-λock®
Download after registration
F1003NNL2000SAA S 0.787 inch A 1.496 inch 3 0.787 inch Safe-λock®
Download after registration
F1003NNL3/16ZSAA S A Safe-λock®
F1003NNL3/32ZSAA S A Safe-λock®
F1003NNL3/4ZSAA S A Safe-λock®
F1003NNL3/8ZSAA S A Safe-λock®
F1003NNL5/16ZSAA S A Safe-λock®
F1003NNL5/8ZSAA S A Safe-λock®
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter