For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
Face Mill Arbor, DIN 69882-3, HSK-A63/80
Face Mill Arbor, DIN 69882-3, HSK-A63/80
Quality pass
Chuck body fine balanced G2.5 33.000 1/min or U
All functional surfaces fine machined
More accurate than DIN
Scope of Delivery
- With tightening bolt
- Without coolant tube
HAIMER TIP
Optional with coolant exit bores on the end face for milling cutters with central cooling (on request)
Face Mill Arbor, DIN 69882-3, HSK-A63/80
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 0.866 inch |
| Length A | A | 1.969 inch |
| A-length version | short | |
| Diameter 2 | D2 | 1.89 inch |
| Length | L | 3/4 inch |
| Interface | HSK-A63/80 | |
| Mass (weight) | D7 | 1,602 kg |
| Flange diameter | A4 | 3.15 inch |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| Weight | WT | 1,602 kg |
| Flange diameter | DF | 3.15 inch |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
Description
Face Mill Arbor, DIN 69882-3, HSK-A63/80
Quality pass
Chuck body fine balanced G2.5 33.000 1/min or U
All functional surfaces fine machined
More accurate than DIN
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
DIN 69882-3
Scope of Delivery
- With tightening bolt
- Without coolant tube
HAIMER TIP
Optional with coolant exit bores on the end face for milling cutters with central cooling (on request)
Technical specifications
Face Mill Arbor, DIN 69882-3, HSK-A63/80
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 0.866 inch |
| Length A | A | 1.969 inch |
| A-length version | short | |
| Diameter 2 | D2 | 1.89 inch |
| Length | L | 3/4 inch |
| Interface | HSK-A63/80 | |
| Mass (weight) | D7 | 1,602 kg |
| Flange diameter | A4 | 3.15 inch |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| Weight | WT | 1,602 kg |
| Flange diameter | DF | 3.15 inch |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| A63/80.050.22 | short | 0.866 inch | HSK-A63/80 | 1.969 inch |
Download after registration
|
|
| A63/80.050.27 | short | 1.063 inch | HSK-A63/80 | 2.362 inch |
Download after registration
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001