Duo-Lock Monoblock holder for direct clamping. Perfectly suitable for milling with short overhang.
Duo-Lock Monoblock holder ISO 26623-1 PSC 50
Duo-Lock Monoblock holder ISO 26623-1 PSC 50
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
- All holders incl. inner cooling
- Hardened 54 - 2 HRC
Duo-Lock Monoblock holder ISO 26623-1 PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Size | DL16 | |
| Length A | A | 2.382 inch |
| Diameter 1 | D1 | 0.63 inch |
| Diameter 2 | D2 | 0.61 inch |
| Length 1 | L1 | 1.299 inch |
| Length 2 | L2 | 0.315 inch |
| Interface | PSC50 |
Description
Duo-Lock Monoblock holder ISO 26623-1 PSC 50
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
Duo-Lock Monoblock holder for direct clamping. Perfectly suitable for milling with short overhang.
- All holders incl. inner cooling
- Hardened 54 - 2 HRC
Technical specifications
Duo-Lock Monoblock holder ISO 26623-1 PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Size | DL16 | |
| Length A | A | 2.382 inch |
| Diameter 1 | D1 | 0.63 inch |
| Diameter 2 | D2 | 0.61 inch |
| Length 1 | L1 | 1.299 inch |
| Length 2 | L2 | 0.315 inch |
| Interface | PSC50 |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Diameter 1 | Interface | Length 1 | Length A | Size | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|
| CC5.190.DL16 | 0.63 inch | PSC50 | 1.299 inch | 2.382 inch | DL16 |
|
|
| CC5.190.DL20 | 0.787 inch | PSC50 | 1.299 inch | 2.382 inch | DL20 |
|
|
| CC5.190.DL25 | 0.984 inch | PSC50 | 1.496 inch | 2.825 inch | DL25 |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001