Reduction sleeves allow clamping of several different shank diameters with just one tool holder.
The reduction sleeves with Safe-Lock can be used in HAIMER Power Hydraulic Chucks to clamp tools with Safe-Lock shanks. The tools are protected against pull out by the additional form lock. The reduction sleeve is screwed into the hydraulic chuck and tightened to also be secured against pull out.
Included in delivery: with back-up screw (Order No. 85.810.15.3)
| 説明 | 規格： | 表記： メトリック/ インチ |
|---|---|---|
| クランプ径 | D1 | 12 mm |
| 直径2 | D2 | 32 mm |
| 長さ 1 | L1 | 60 mm |
| 長さ 2 | L2 | 45 mm |
| ネジ 1 | G1 | M6 |
| Thread | G2 | M16x1 |
Reduction sleeves allow clamping of several different shank diameters with just one tool holder.
The reduction sleeves with Safe-Lock can be used in HAIMER Power Hydraulic Chucks to clamp tools with Safe-Lock shanks. The tools are protected against pull out by the additional form lock. The reduction sleeve is screwed into the hydraulic chuck and tightened to also be secured against pull out.
Included in delivery: with back-up screw (Order No. 85.810.15.3)
| 説明 | 規格： | 表記： メトリック/ インチ |
|---|---|---|
| クランプ径 | D1 | 12 mm |
| 直径2 | D2 | 32 mm |
| 長さ 1 | L1 | 60 mm |
| 長さ 2 | L2 | 45 mm |
| ネジ 1 | G1 | M6 |
| Thread | G2 | M16x1 |
| 注文番号 | クランプ径 | 長さ 1 | ダウンロード | メトリック/ インチ |
|---|---|---|---|---|
| 76.323.12.27.BG | 12 mm | 60 mm |
|
|
| 76.323.16.27.BG | 16 mm | 60 mm |
|
|
| 76.323.20.27.BG | 20 mm | 60 mm |
|
|
| 76.323.25.27.BG | 25 mm | 60 mm |
|
