Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
Descripción
Power Mini Shrink Chuck ISO 26623-1 PSC 40
Pasaporte de calidad
Portaherramientas con equilibrado fino G 2.5 a 25.000 rpm
Todas las superficies funcionales rectificadas
Más preciso que DIN
Compatible con Capto
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
HAIMER TIPP
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint / Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Datos técnicos
Aviso
Technical data subjects to change without prior notice.
| Descripción | Norma: Haimer | Valor: metric/inch |
|---|---|---|
| Diámetro de sujeción | D1 | 5 mm / 0.197 inch |
| Longitud A | A | 100 mm / 3.937 inch |
| Versión de longitud A | lang | |
| Diámetro 2 | D2 | 11 mm / 0.433 inch |
| Longitud | L | 50 mm / 1.969 inch |
| Interfaz | PSC40 |