Solid carbide milling head with Duo-Lock interface for maximum stability, load capacity and runout accuracy.
Characteristics
Applications
Areas of application-material
Description
Duo-Lock HAIMER MILL Power Series - F1004MN Chamfer - radial cooling
Modular milling head
Quality pass
Particularly suitable for Long overhang and labile clamping
Best results with DL-HM extension
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal helix
- Best length repeatability
- Polished flute and relief
- Suitable for cutting in aluminum
- Particularly suitable for long overhang and labile clamping
HAIMER TIP
Best results with solid carbide Duo-Lock extension
Technical specifications
Notice
Technical data subject to change without prior notice.
| Description | Norm: HAIMER | Value: metric/inch |
|---|---|---|
| Duo-Lock size | DL16 | |
| Cutting edge diameter | D1 | 16 mm / 0.63 inch |
| Cooling | mit Kühlung radial | |
| D1 Tolerance | f9 | |
| Number of cutting edges | Z | 4 |
| Corner design | C | |
| Chamfer size | C | 0,32 mm / 0.013 inch |
| Chamfer angle | W | 45 ° |
| Length of cutting edge | L1 | 24 mm / 0.945 inch |
| Overalllength | L | 52 mm / 2.047 inch |
| Head length | L | 32 mm / 1.26 inch |
| Neck diameter | D2 | 15,5 mm / 0.61 inch |
| Shank diameter | D | 11,5 mm / 0.453 inch |
| Shanklength | LS | 20 mm / 0.787 inch |
| Wrench size | 13 | |
| Type | L1 max, = 24 | |
| Helix angle | 37/39 ° | |
| HAIMER Material | D | |
| HAIMER Coating | - | |
| Torque | 60 Nm |
| Description | Norm: DIN 4000 | Value: metric/inch |
|---|---|---|
| Cutting diameter | A1 | 16 mm / 0.63 inch |
| Peripheral effective cutting edge count | F21 | 4 |
| Corner chamfer width | G2 | 0,32 mm / 0.013 inch |
| Corner chamfer angle | G3 | 45 ° |
| Cutting edge length, max. | B2 | 24 mm / 0.945 inch |
| Overalllength | B5 | 52 mm / 2.047 inch |
| Head length | B6 | 32 mm / 1.26 inch |
| Neck diameter | A5 | 15,5 mm / 0.61 inch |
| Connection diameter, machine side | C3 | 11,5 mm / 0.453 inch |
| Shanklength | C4 | 20 mm / 0.787 inch |
| Helix angle | F4 | 38 ° |
| Mass (weight) | D7 | 0,085 kg |
| Description | Norm: ISO 13399 | Value: metric/inch |
|---|---|---|
| Weight | WT | 0,085 kg |
Characteristics
Helix angle 36,5/38,5°
Corner chamfer 45°
Teeth 4
Applications
- Suitable for cutting in aluminum
- Particularly suitable for long overhang and labile clamping
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
FURTHER AREAS OF APPLICATION
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
Operations
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Slotting
Side milling
Cooling
Emulsion
Cold air
Dry machining
Minimal lubrication
Inner cooling