back

Shrink Fit Chuck Standard Version, Similar ASME B5.50 · CAT50 With Face Contact

Order number: 50P.844.7/16Z.4
Clamping diameter
A-length version
Upgrade
Shrink Fit Chuck Standard Version, Similar ASME B5.50 · CAT50 With Face Contact
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
Taper tolerance AT3
Coolant supply form AD
Cool Jet, can be sealed

Shrink fit chuck suitable for use with all available shrink fit units.

Additional support on the flange surface for more rigidity.

 

Similar ASME B5.50 CAT50 Form AD with face contact

Form AD means central coolant supply

  • Heat resistant hot-working steel
  • Hardened 54 -2 HRC
  • For HSS and solid carbid tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Cool Jet coolant bores that can be sealed included
  • Compatible with Big-Plus spindles
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, Similar ASME B5.50 · CAT50 With Face Contact
asset-113653-1006
Description Norm: Value: metric/ inch
Clamping diameter D1 11,1125 mm
Length A A 130 mm
A-length version ZG130
Diameter 2 D2 24 mm
Diameter 3 D3 32 mm
Length L 42 mm
Interface CAT50 with Face Contact
Upgrade with Cool Jet
Mass (weight) D7 3,521 kg
Weight WT 3,521 kg
Shrink Fit Chuck Standard Version, Similar ASME B5.50 · CAT50 With Face Contact
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
Taper tolerance AT3
Coolant supply form AD
Cool Jet, can be sealed

Shrink fit chuck suitable for use with all available shrink fit units.

Additional support on the flange surface for more rigidity.

 

Similar ASME B5.50 CAT50 Form AD with face contact

Form AD means central coolant supply

  • Heat resistant hot-working steel
  • Hardened 54 -2 HRC
  • For HSS and solid carbid tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Cool Jet coolant bores that can be sealed included
  • Compatible with Big-Plus spindles
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, Similar ASME B5.50 · CAT50 With Face Contact
asset-113653-1006
Description Norm: Value: metric/ inch
Clamping diameter D1 11,1125 mm
Length A A 130 mm
A-length version ZG130
Diameter 2 D2 24 mm
Diameter 3 D3 32 mm
Length L 42 mm
Interface CAT50 with Face Contact
Upgrade with Cool Jet
Mass (weight) D7 3,521 kg
Weight WT 3,521 kg
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Upgrade Downloads metric/ inch
50P.840.1/2Z.4 short 12,7 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.1/4Z.4 short 6,35 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.11/4Z.4 short 31,75 mm CAT50 with Face Contact 100 mm with Cool Jet
Download after registration
50P.840.1Z.4 short 25,4 mm CAT50 with Face Contact 100 mm with Cool Jet
Download after registration
50P.840.3/4Z.4 short 19,05 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.3/8Z.4 short 9,525 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.5/16Z.4 short 7,9375 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.5/8Z.4 short 15,875 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.7/16Z.4 short 11,1125 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.840.7/8Z.4 short 22,225 mm CAT50 with Face Contact 80 mm with Cool Jet
Download after registration
50P.842.1/2Z.4 oversize (160 mm) 12,7 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.1/4Z.4 oversize (160 mm) 6,35 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.11/4Z.4 oversize (160 mm) 31,75 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.1Z.4 oversize (160 mm) 25,4 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.3/4Z.4 oversize (160 mm) 19,05 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.3/8Z.4 oversize (160 mm) 9,525 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.5/16Z.4 oversize (160 mm) 7,9375 mm CAT50 with Face Contact 160 mm with Cool Jet
50P.842.5/8Z.4 oversize (160 mm) 15,875 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.842.7/16Z.4 oversize (160 mm) 11,1125 mm CAT50 with Face Contact 160 mm with Cool Jet
50P.842.7/8Z.4 oversize (160 mm) 22,225 mm CAT50 with Face Contact 160 mm with Cool Jet
Download after registration
50P.844.1/2Z.4 ZG130 12,7 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.1/4Z.4 ZG130 6,35 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.11/4Z.4 ZG130 31,75 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.1Z.4 ZG130 25,4 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.3/4Z.4 ZG130 19,05 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.3/8Z.4 ZG130 9,525 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
50P.844.5/16Z.4 ZG130 7,9375 mm CAT50 with Face Contact 130 mm with Cool Jet
50P.844.5/8Z.4 ZG130 15,875 mm CAT50 with Face Contact 130 mm with Cool Jet
50P.844.7/16Z.4 ZG130 11,1125 mm CAT50 with Face Contact 130 mm with Cool Jet
50P.844.7/8Z.4 ZG130 22,225 mm CAT50 with Face Contact 130 mm with Cool Jet
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter