Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm. ISO 26623.
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 40
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 40
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Scope of Delivery
With back-up screw without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 40
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 75 mm |
| A-length version | short | |
| Diameter 2 | D2 | 10 mm |
| Diameter 3 | D3 | - mm |
| Length | L | - mm |
| Interface | PSC40 |
Description
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 40
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
Shrink Fit Chuck suitable to all kind of shrink fit units. Available from Ø 3 mm – 20 mm. ISO 26623.
- With threaded holes in order to balance with balancing screws
- For HSS and solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
- Cooling with Cool Jet or Cool Flash for an extra charge
Scope of Delivery
With back-up screw without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
Technical specifications
Shrink Fit Chuck Standard Version ISO 26623-1 HAIMER PSC 40
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 75 mm |
| A-length version | short | |
| Diameter 2 | D2 | 10 mm |
| Diameter 3 | D3 | - mm |
| Length | L | - mm |
| Interface | PSC40 |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Upgrade | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|
| CC4.140.03.1 | short | 3 mm | PSC40 | 75 mm |
|
||
| CC4.140.04.1 | short | 4 mm | PSC40 | 75 mm |
|
||
| CC4.140.05.1 | short | 5 mm | PSC40 | 75 mm |
|
||
| CC4.140.06 | short | 6 mm | PSC40 | 75 mm |
Download after registration
|
||
| CC4.140.06.26 | short | 6 mm | PSC40 | 75 mm | with Cool Flash |
|
|
| CC4.140.08 | short | 8 mm | PSC40 | 75 mm |
Download after registration
|
||
| CC4.140.08.26 | short | 8 mm | PSC40 | 75 mm | with Cool Flash |
|
|
| CC4.140.10 | short | 10 mm | PSC40 | 75 mm |
Download after registration
|
||
| CC4.140.10.26 | short | 10 mm | PSC40 | 75 mm | with Cool Flash |
|
|
| CC4.140.12 | short | 12 mm | PSC40 | 75 mm |
Download after registration
|
||
| CC4.140.14 | short | 14 mm | PSC40 | 80 mm |
|
||
| CC4.140.16 | short | 16 mm | PSC40 | 80 mm |
Download after registration
|
||
| CC4.140.18 | short | 18 mm | PSC40 | 80 mm |
|
||
| CC4.140.20 | short | 20 mm | PSC40 | 85 mm |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001