back

Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A100

Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A100
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A100
Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A100
Technical drawing Shrink Fit Chuck Standard Version DIN 69893-1 · HSK-A100
Order number: A10.144.32
Clamping diameter
A-length version
Upgrade
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A100
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1 and Shrink Fit version similar to DIN 69882-8.
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A100
asset-115705-787
Description Norm: Value: metric/ inch
Clamping diameter D1 32 mm
Length A A 130 mm
A-length version ZG130
Diameter 2 D2 44 mm
Diameter 3 D3 53 mm
Length L 58 mm
Interface HSK-A100
Mass (weight) D7 3,270 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 53 mm
Flange diameter A4 100 mm
Interference diameter A6 44 mm
Length body diameter 1 B1 101 mm
Protruding length B3 130 mm
Overall length B4 180 mm
Taper angle B51 4,5 °
Functional length B71 72 mm
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 1000
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0320
Connection diameter min C71 32
Clamping length max. / nominal length C81 58 mm
Clamping length, min., workpiece side C82 48 mm
Balance grade D5 G2,5/25000
Balancing device D51 1
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 ZYL03200115
interface code to machine side J6 HSK10000115
Weight WT 3,270 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 53 mm
Flange diameter DF 100 mm
Interference diameter DCINTF 44 mm
Length body diameter 1 LBD1 101 mm
Protruding length LPR 130 mm
Overall length OAL 180 mm
Taper angle TA 4,5 °
Functional length LF 72 mm
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0320
Connection diameter min DCONN 32
Clamping length max. / nominal length LSCX 58 mm
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A100
Quality pass
Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck for clamping shank tools, suitable for use with all available shrink fit units.
DIN 69893-1 and Shrink Fit version similar to DIN 69882-8.
  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
Scope of Delivery
  • With backup screw
  • Without coolant tube
HAIMER TIP
For a constant and acurate cooling of te cutting tool we recommend the optional cooling system Cool Jet. For RPM higher 8000 U/min we recommend the optional cooling system Cool Flash. (on request)
The most important features:
  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet (optional)
  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash (optional)
  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Shrink Fit Chuck Standard Version, DIN 69893-1, HSK-A100
asset-115705-787
Description Norm: Value: metric/ inch
Clamping diameter D1 32 mm
Length A A 130 mm
A-length version ZG130
Diameter 2 D2 44 mm
Diameter 3 D3 53 mm
Length L 58 mm
Interface HSK-A100
Mass (weight) D7 3,270 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 A1 53 mm
Flange diameter A4 100 mm
Interference diameter A6 44 mm
Length body diameter 1 B1 101 mm
Protruding length B3 130 mm
Overall length B4 180 mm
Taper angle B51 4,5 °
Functional length B71 72 mm
item style code BLD 504145
Connection code type machine side C11 HSK
Connection code form type machine side C12 01
Connection code unit base machine side C14 1
Connection code style machine side C15 5
Connection size code machine side C2 1000
Connection code type workpiece side C51 ZYL
Connection code form type workpiece side C52 01
Connection code unit base workpiece side C54 1
Connection code style workpiece side C55 5
Connection size code workpiece side C6 0320
Connection diameter min C71 32
Clamping length max. / nominal length C81 58 mm
Clamping length, min., workpiece side C82 48 mm
Balance grade D5 G2,5/25000
Balancing device D51 1
Hand E1 N
coolant entry style code H21 1
coolant exit style code H22 1
Company identification J3 HAI
interface code to workpiece side J4 ZYL03200115
interface code to machine side J6 HSK10000115
Weight WT 3,270 kg
Standard number of properties layout NSM DIN4000-89
Body diameter 1 BD1 53 mm
Flange diameter DF 100 mm
Interference diameter DCINTF 44 mm
Length body diameter 1 LBD1 101 mm
Protruding length LPR 130 mm
Overall length OAL 180 mm
Taper angle TA 4,5 °
Functional length LF 72 mm
Connection code type machine side CCTMS HSK
Connection code unit base workpiece side CCUWS 1
Connection code style workpiece side CCSWS 5
Connection size code workpiece side CZCWS 0320
Connection diameter min DCONN 32
Clamping length max. / nominal length LSCX 58 mm
Hand HAND N
coolant entry style code CNSC 1
coolant exit style code CXSC 1
Company identification COMPC HAI
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
register now
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. A-length version Clamping diameter Interface Length A Downloads metric/ inch
A10.140.06 short 6 mm HSK-A100 85 mm
Download after registration
A10.140.08 short 8 mm HSK-A100 85 mm
Download after registration
A10.140.10 short 10 mm HSK-A100 90 mm
Download after registration
A10.140.12 short 12 mm HSK-A100 95 mm
Download after registration
A10.140.14 short 14 mm HSK-A100 95 mm
Download after registration
A10.140.16 short 16 mm HSK-A100 100 mm
Download after registration
A10.140.18 short 18 mm HSK-A100 100 mm
Download after registration
A10.140.20 short 20 mm HSK-A100 105 mm
Download after registration
A10.140.25 short 25 mm HSK-A100 115 mm
Download after registration
A10.140.32 short 32 mm HSK-A100 120 mm
Download after registration
A10.142.06 oversize (160 mm) 6 mm HSK-A100 160 mm
Download after registration
A10.142.08 oversize (160 mm) 8 mm HSK-A100 160 mm
Download after registration
A10.142.10 oversize (160 mm) 10 mm HSK-A100 160 mm
Download after registration
A10.142.12 oversize (160 mm) 12 mm HSK-A100 160 mm
Download after registration
A10.142.14 oversize (160 mm) 14 mm HSK-A100 160 mm
Download after registration
A10.142.16 oversize (160 mm) 16 mm HSK-A100 160 mm
Download after registration
A10.142.18 oversize (160 mm) 18 mm HSK-A100 160 mm
Download after registration
A10.142.20 oversize (160 mm) 20 mm HSK-A100 160 mm
Download after registration
A10.142.25 oversize (160 mm) 25 mm HSK-A100 160 mm
Download after registration
A10.142.32 oversize (160 mm) 32 mm HSK-A100 160 mm
Download after registration
A10.144.06 ZG130 6 mm HSK-A100 130 mm
Download after registration
A10.144.08 ZG130 8 mm HSK-A100 130 mm
Download after registration
A10.144.10 ZG130 10 mm HSK-A100 130 mm
Download after registration
A10.144.12 ZG130 12 mm HSK-A100 130 mm
Download after registration
A10.144.14 ZG130 14 mm HSK-A100 130 mm
Download after registration
A10.144.16 ZG130 16 mm HSK-A100 130 mm
Download after registration
A10.144.18 ZG130 18 mm HSK-A100 130 mm
Download after registration
A10.144.20 ZG130 20 mm HSK-A100 130 mm
Download after registration
A10.144.25 ZG130 25 mm HSK-A100 130 mm
Download after registration
A10.144.32 ZG130 32 mm HSK-A100 130 mm
Download after registration
A10.146.06 ZG200 6 mm HSK-A100 200 mm
Download after registration
A10.146.08 ZG200 8 mm HSK-A100 200 mm
Download after registration
A10.146.10 ZG200 10 mm HSK-A100 200 mm
Download after registration
A10.146.12 ZG200 12 mm HSK-A100 200 mm
Download after registration
A10.146.14 ZG200 14 mm HSK-A100 200 mm
Download after registration
A10.146.16 ZG200 16 mm HSK-A100 200 mm
Download after registration
A10.146.18 ZG200 18 mm HSK-A100 200 mm
Download after registration
A10.146.20 ZG200 20 mm HSK-A100 200 mm
Download after registration
A10.146.25 ZG200 25 mm HSK-A100 200 mm
Download after registration
A10.146.32 ZG200 32 mm HSK-A100 200 mm
Download after registration
A10.147.06 ZG120 6 mm HSK-A100 120 mm
Download after registration
A10.147.08 ZG120 8 mm HSK-A100 120 mm
Download after registration
A10.147.10 ZG120 10 mm HSK-A100 120 mm
Download after registration
A10.147.12 ZG120 12 mm HSK-A100 120 mm
Download after registration
A10.147.14 ZG120 14 mm HSK-A100 120 mm
Download after registration
A10.147.16 ZG120 16 mm HSK-A100 120 mm
Download after registration
A10.147.18 ZG120 18 mm HSK-A100 120 mm
Download after registration
A10.147.20 ZG120 20 mm HSK-A100 120 mm
Download after registration
A10.147.25 ZG120 25 mm HSK-A100 120 mm
Download after registration
Accessories

Accessories

Coolant tubes HSK
Coolant tubes HSK
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter