Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
Power Mini Shrink Chuck ISO 26623-1 PSC 50
Power Mini Shrink Chuck ISO 26623-1 PSC 50
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
HAIMER TIP
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint/Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Power Mini Shrink Chuck ISO 26623-1 PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 100 mm |
| A-length version | long | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 50 mm |
| Interface | PSC50 |
Description
Power Mini Shrink Chuck ISO 26623-1 PSC 50
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
HAIMER TIP
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint/Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Technical specifications
Power Mini Shrink Chuck ISO 26623-1 PSC 50
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 100 mm |
| A-length version | long | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 50 mm |
| Interface | PSC50 |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| CC5.181.03.8 | long | 3 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.04.8 | long | 4 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.05.8 | long | 5 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.06.8 | long | 6 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.08.8 | long | 8 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.10.8 | long | 10 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.12.8 | long | 12 mm | PSC50 | 100 mm |
Download after registration
|
|
| CC5.181.16.8 | long | 16 mm | PSC50 | 100 mm |
Download after registration
|
Accessories
Accessories
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001