Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
Power Mini Shrink Chuck ISO 26623-1 PSC 40
Power Mini Shrink Chuck ISO 26623-1 PSC 40
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
HAIMER TIP
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint / Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Power Mini Shrink Chuck ISO 26623-1 PSC 40
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 100 mm |
| A-length version | long | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 50 mm |
| Interface | PSC40 |
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
Description
Power Mini Shrink Chuck ISO 26623-1 PSC 40
Quality pass
Chuck fine balanced G2.5 at 25.000 rpm
All functional surfaces fine machined
More accurate than DIN
Compatible with Capto
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
HAIMER TIP
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint / Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Technical specifications
Power Mini Shrink Chuck ISO 26623-1 PSC 40
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 100 mm |
| A-length version | long | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 50 mm |
| Interface | PSC40 |
Downloads
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| CC4.181.03.8 | long | 3 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.04.8 | long | 4 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.05.8 | long | 5 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.06.8 | long | 6 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.08.8 | long | 8 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.10.8 | long | 10 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.12.8 | long | 12 mm | PSC40 | 100 mm |
Download after registration
|
|
| CC4.181.16.8 | long | 16 mm | PSC40 | 100 mm |
Download after registration
|
Accessories
Accessories
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001