Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Very slim at the top like the HAIMER Mini Shrink Chucks, Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Power Mini Shrink Chuck, DIN 69893-1, HSK-A63/80
Taper HSK-A63/Flange 80 mm
Power Mini Shrink Chuck, DIN 69893-1, HSK-A63/80
Taper HSK-A63/Flange 80 mm
Quality pass
Chuck fine balanced G2.5 at 33.000 rpm
All functional surfaces fine machined
More accurate than DIN
- 3 mm wall thickness
- 3° slope at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 – 2 HRC
Scope of Delivery
- Incl. pocket for data chip
HAIMER TIP
Note: Shrink and cooling sleeves are required for shrinking on most shrink fit machines (see accessories). When using the Power Clamp i4.0 Sprint / Air or Nano machines with a motorized coil and scanner, the sleeves are not necessary.
Power Mini Shrink Chuck, DIN 69893-1, HSK-A63/80
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 160 mm |
| A-length version | oversize (160 mm) | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 80 mm |
| Interface | HSK-A63/80 | |
| Mass (weight) | D7 | 2,400 kg |
| Flange diameter | A4 | 80 mm |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| Weight | WT | 2,400 kg |
| Flange diameter | DF | 80 mm |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
Description
Power Mini Shrink Chuck, DIN 69893-1, HSK-A63/80
Taper HSK-A63/Flange 80 mm
Quality pass
Chuck fine balanced G2.5 at 33.000 rpm
All functional surfaces fine machined
More accurate than DIN
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Very slim at the top like the HAIMER Mini Shrink Chucks, Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Very slim at the top like the HAIMER Mini Shrink Chucks, Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
- 3 mm wall thickness
- 3° slope at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 – 2 HRC
Scope of Delivery
- Incl. pocket for data chip
HAIMER TIP
Note: Shrink and cooling sleeves are required for shrinking on most shrink fit machines (see accessories). When using the Power Clamp i4.0 Sprint / Air or Nano machines with a motorized coil and scanner, the sleeves are not necessary.
Technical specifications
Power Mini Shrink Chuck, DIN 69893-1, HSK-A63/80
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Clamping diameter | D1 | 3 mm |
| Length A | A | 160 mm |
| A-length version | oversize (160 mm) | |
| Diameter 2 | D2 | 9 mm |
| Length | L | 80 mm |
| Interface | HSK-A63/80 | |
| Mass (weight) | D7 | 2,400 kg |
| Flange diameter | A4 | 80 mm |
| Hand | E1 | N |
| Company identification | J3 | HAI |
| Weight | WT | 2,400 kg |
| Flange diameter | DF | 80 mm |
| Hand | HAND | N |
| Company identification | COMPC | HAI |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | A-length version | Clamping diameter | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|---|
| A63/80.182.03.8 | oversize (160 mm) | 3 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.04.8 | oversize (160 mm) | 4 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.05.8 | oversize (160 mm) | 5 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.06.8 | oversize (160 mm) | 6 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.08.8 | oversize (160 mm) | 8 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.10.8 | oversize (160 mm) | 10 mm | HSK-A63/80 | 160 mm |
Download after registration
|
|
| A63/80.182.12.8 | oversize (160 mm) | 12 mm | HSK-A63/80 | 160 mm |
Download after registration
|
Accessories
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001