HSK-A100 grinding wheel adapter Multi-part with 4 bis 6 clamping screws
HSK-A100 GRINDING WHEEL ADAPTER – MULTI-PART WITH 4 TO 6 CLAMPING SCREWS
HSK-A100 GRINDING WHEEL ADAPTER – MULTI-PART WITH 4 TO 6 CLAMPING SCREWS
Quality pass
All function surfaces finely processed
More accurate than DIN
Basic body with balancing thread
Weighted
- Fine balanced (without clamping flange) at G2.5 at 25,000 rpm
- Incl. external cooling
- Standard clamping height (see table)
- special clamping height possible on request
- Incl. balancing threads for fine balancing
- Vibration dampening possible at extra charge
- Individual cooling (through the grinding wheel) possible for an extra charge and by special request (must be checked individually)
- From Ø 50.8 (2") incl. balancing weight slot
- Optimized design for total weight reduction
HAIMER TIP
Other basic tapers possible on request, longer A dimensions possible on request, any clamping diameter possible on request
HSK-A100 GRINDING WHEEL ADAPTER – MULTI-PART WITH 4 TO 6 CLAMPING SCREWS
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Diameter 1 | D1 | 32 |
| Diameter 2 | D2 | 105 |
| Length A | A | 400 mm |
| Length 1 | L1 | 20 |
| Length 2 | L2 | 15 |
| Diameter 3 | D3 | 105 |
| Interface | HSK-A100 |
Description
HSK-A100 GRINDING WHEEL ADAPTER – MULTI-PART WITH 4 TO 6 CLAMPING SCREWS
Quality pass
All function surfaces finely processed
More accurate than DIN
Basic body with balancing thread
Weighted
HSK-A100 grinding wheel adapter Multi-part with 4 bis 6 clamping screws
- Fine balanced (without clamping flange) at G2.5 at 25,000 rpm
- Incl. external cooling
- Standard clamping height (see table)
- special clamping height possible on request
- Incl. balancing threads for fine balancing
- Vibration dampening possible at extra charge
- Individual cooling (through the grinding wheel) possible for an extra charge and by special request (must be checked individually)
- From Ø 50.8 (2") incl. balancing weight slot
- Optimized design for total weight reduction
HAIMER TIP
Other basic tapers possible on request, longer A dimensions possible on request, any clamping diameter possible on request
Technical specifications
HSK-A100 GRINDING WHEEL ADAPTER – MULTI-PART WITH 4 TO 6 CLAMPING SCREWS
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Diameter 1 | D1 | 32 |
| Diameter 2 | D2 | 105 |
| Length A | A | 400 mm |
| Length 1 | L1 | 20 |
| Length 2 | L2 | 15 |
| Diameter 3 | D3 | 105 |
| Interface | HSK-A100 |
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Diameter 1 | Interface | Length A | Downloads | metric/ inch |
|---|---|---|---|---|---|
| A10.160.32.400.003.HA | 32 | HSK-A100 | 400 mm |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001