back

HAIMER Panther MILL - F3004NN Chamfer

Solid carbide end mill
Characteristics
Corner chamfer 45° Corner chamfer 45°
Teeth 4 Teeth 4
Helix angle 36,5/38,5° Helix angle 36,5/38,5°
Applications
Feed direction (Side milling, Ramping) Feed direction (Side milling, Ramping)
Ramping 2-3° Ramping 2-3°
Slotting Slotting
Side milling Side milling
Areas of application-material
P Steel
M Stainless steel
K Cast iron
S High temperature alloys and titanium alloys
N NF metals
H Hard materials
Order number:
Cutting edge diameter
Shank version
HAIMER Panther MILL - F3004NN Chamfer
Solid carbide end mill
Quality pass
Shank tolerance h6
Runout < 0.0004" (10 µm)

HAIMER Panther MILL is the absolute all-rounder for side milling and slotting in all steel and stainless materials.

Four cutting edges with unequal pitch and unequal helix provide extremely smooth milling conditions. Thanks to the latest coating technology, the milling cutter adapts perfectly to its environment like a panther, increasing tool life by 30 to 40% compared to conventional coatings. The optimized cutting edge geometry and the adapted helix angle of 36°/38° ensure optimum chip evacuation and therefore perfect surface quality and high process reliability.

  • Ferocious: Maximum cutting volume in steel and stainless materials
  • Sharp: Sharp teeth and stable cutting edges for efficient machining
  • Smooth: Moves elegantly with low vibrations for best surface finishes
  • Resilient: Modern and resistant coating ensures long tool life and maximum performance 
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Optimized forehead design
  • Minimized wear due to stabilized cutting edges
  • Eccentric relief grinding
  • Particularly low-vibration running
  • For almost all materials
  • For roughing and finishing
  • For ramping, drilling and slotting
HAIMER TIP
Cooling with Cool Jet or Cool Flash and using Power Chucks is recommended for higher tool life and high removal rate.
HAIMER Panther MILL - F3004NN Chamfer
asset-137545-26263
Description Norm: Value: metric/ inch
Cutting edge diameter D1 2 mm
D1 Tolerance f9
Number of cutting edges Z 4
Corner design C
Chamfer size C 0,04 mm
Chamfer angle W 45 °
Length of cutting edge L1 4 mm
Overalllength L 58 mm
Neck diameter D2 1,9 mm
Neck length L2 6 mm
Shank diameter D 6 mm
Shank version Weldon shank
Helix angle 36/38 °
HAIMER Material D
HAIMER Coating B
Cutting diameter A1 2 mm
Peripheral effective cutting edge count F21 4
Corner chamfer width G2 0,04 mm
Corner chamfer angle G3 45 °
Cutting edge length, max. B2 4 mm
Overalllength B5 58 mm
Neck diameter A5 1,9 mm
Neck length B9 6 mm
Connection diameter, machine side C3 6 mm
Helix angle F4 36/38 °
Mass (weight) D7 0,02 kg
Weight WT 0,02 kg
Characteristics
Corner chamfer 45° Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4 Teeth 4
Teeth 4
Teeth 4
Helix angle 36,5/38,5° Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Applications
  • For almost all materials
  • For roughing and finishing
  • For ramping, drilling and slotting
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
FURTHER AREAS OF APPLICATION
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
H
Hard materials
Hardened steel, hardened cast iron materials, chilled cast iron
H
TIP
Cooling with Cool Jet or Cool Flash and using Power Chucks is recommended for higher tool life and high removal rate.
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 2-3°
Ramping 2-3°
Ramping 2-3°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER Panther MILL - F3004NN Chamfer
Download (pdf | 76.7 KB) show online
HAIMER Panther MILL - F3004NN Chamfer
Solid carbide end mill
Quality pass
Shank tolerance h6
Runout < 0.0004" (10 µm)

HAIMER Panther MILL is the absolute all-rounder for side milling and slotting in all steel and stainless materials.

Four cutting edges with unequal pitch and unequal helix provide extremely smooth milling conditions. Thanks to the latest coating technology, the milling cutter adapts perfectly to its environment like a panther, increasing tool life by 30 to 40% compared to conventional coatings. The optimized cutting edge geometry and the adapted helix angle of 36°/38° ensure optimum chip evacuation and therefore perfect surface quality and high process reliability.

  • Ferocious: Maximum cutting volume in steel and stainless materials
  • Sharp: Sharp teeth and stable cutting edges for efficient machining
  • Smooth: Moves elegantly with low vibrations for best surface finishes
  • Resilient: Modern and resistant coating ensures long tool life and maximum performance 
  • Neck for higher cutting depth
  • Center cutting
  • Unequal cutting edge
  • Optimized forehead design
  • Minimized wear due to stabilized cutting edges
  • Eccentric relief grinding
  • Particularly low-vibration running
  • For almost all materials
  • For roughing and finishing
  • For ramping, drilling and slotting
HAIMER TIP
Cooling with Cool Jet or Cool Flash and using Power Chucks is recommended for higher tool life and high removal rate.
HAIMER Panther MILL - F3004NN Chamfer
asset-137545-26263
Description Norm: Value: metric/ inch
Cutting edge diameter D1 2 mm
D1 Tolerance f9
Number of cutting edges Z 4
Corner design C
Chamfer size C 0,04 mm
Chamfer angle W 45 °
Length of cutting edge L1 4 mm
Overalllength L 58 mm
Neck diameter D2 1,9 mm
Neck length L2 6 mm
Shank diameter D 6 mm
Shank version Weldon shank
Helix angle 36/38 °
HAIMER Material D
HAIMER Coating B
Cutting diameter A1 2 mm
Peripheral effective cutting edge count F21 4
Corner chamfer width G2 0,04 mm
Corner chamfer angle G3 45 °
Cutting edge length, max. B2 4 mm
Overalllength B5 58 mm
Neck diameter A5 1,9 mm
Neck length B9 6 mm
Connection diameter, machine side C3 6 mm
Helix angle F4 36/38 °
Mass (weight) D7 0,02 kg
Weight WT 0,02 kg
Characteristics
Corner chamfer 45° Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4 Teeth 4
Teeth 4
Teeth 4
Helix angle 36,5/38,5° Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Helix angle 36,5/38,5°
Applications
  • For almost all materials
  • For roughing and finishing
  • For ramping, drilling and slotting
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
P
Steel
All types of steel and cast steel, with the exception of steel with an austenitic structure
P
M
Stainless steel
Stainless austenitic steel and austenitic-ferritic steel and cast steel
M
FURTHER AREAS OF APPLICATION
K
Cast iron
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
K
S
High temperature alloys and titanium alloys
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
S
N
NF metals
Aluminium and other non-ferrous metals, non ferrous materials
N
H
Hard materials
Hardened steel, hardened cast iron materials, chilled cast iron
H
TIP
Cooling with Cool Jet or Cool Flash and using Power Chucks is recommended for higher tool life and high removal rate.
Operations
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Feed direction (Side milling, Ramping)
Ramping 2-3°
Ramping 2-3°
Ramping 2-3°
Slotting
Slotting
Slotting
Side milling
Side milling
Side milling
Cooling
Emulsion
Emulsion
Emulsion
Cold air
Cold air
Cold air
Dry machining
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER Panther MILL - F3004NN Chamfer
Download (pdf | 76.7 KB) show online
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. Chamfer size Corner design Cutting edge diameter HAIMER Coating Length of cutting edge Number of cutting edges Shank diameter Shank version Downloads metric/ inch
F3004NNB0200CDB 0,04 mm C 2 mm B 4 mm 4 6 mm Weldon shank
Download after registration
F3004NNB0300CDB 0,06 mm C 3 mm B 6 mm 4 6 mm Weldon shank
Download after registration
F3004NNB0400CDB 0,08 mm C 4 mm B 8 mm 4 6 mm Weldon shank
Download after registration
F3004NNB0500CDB 0,10 mm C 5 mm B 10 mm 4 6 mm Weldon shank
Download after registration
F3004NNB0600CDB 0,12 mm C 6 mm B 13 mm 4 6 mm Weldon shank
Download after registration
F3004NNB0800CDB 0,16 mm C 8 mm B 19 mm 4 8 mm Weldon shank
Download after registration
F3004NNB1000CDB 0,2 mm C 10 mm B 22 mm 4 10 mm Weldon shank
Download after registration
F3004NNB1200CDB 0,24 mm C 12 mm B 26 mm 4 12 mm Weldon shank
Download after registration
F3004NNB1400CDB 0,28 mm C 14 mm B 26 mm 4 14 mm Weldon shank
Download after registration
F3004NNB1600CDB 0,32 mm C 16 mm B 36 mm 4 16 mm Weldon shank
Download after registration
F3004NNB1800CDB 0,36 mm C 18 mm B 36 mm 4 18 mm Weldon shank
Download after registration
F3004NNB2000CDB 0,40 mm C 20 mm B 41 mm 4 20 mm Weldon shank
Download after registration
F3004NNH0200CDB 0,04 mm C 2 mm B 4 mm 4 6 mm Straight shank
Download after registration
F3004NNH0300CDB 0,06 mm C 3 mm B 6 mm 4 6 mm Straight shank
Download after registration
F3004NNH0400CDB 0,08 mm C 4 mm B 8 mm 4 6 mm Straight shank
Download after registration
F3004NNH0500CDB 0,10 mm C 5 mm B 10 mm 4 6 mm Straight shank
Download after registration
F3004NNH0600CDB 0,12 mm C 6 mm B 13 mm 4 6 mm Straight shank
Download after registration
F3004NNH0800CDB 0,16 mm C 8 mm B 19 mm 4 8 mm Straight shank
Download after registration
F3004NNH1000CDB 0,2 mm C 10 mm B 22 mm 4 10 mm Straight shank
Download after registration
F3004NNH1200CDB 0,24 mm C 12 mm B 26 mm 4 12 mm Straight shank
Download after registration
F3004NNH1400CDB 0,28 mm C 14 mm B 26 mm 4 14 mm Straight shank
Download after registration
F3004NNH1600CDB 0,32 mm C 16 mm B 36 mm 4 16 mm Straight shank
Download after registration
F3004NNH1800CDB 0,36 mm C 18 mm B 36 mm 4 18 mm Straight shank
Download after registration
F3004NNH2000CDB 0,40 mm C 20 mm B 41 mm 4 20 mm Straight shank
Download after registration
F3004NNL0200CDB 0,04 mm C 2 mm B 4 mm 4 6 mm Safe-λock®
Download after registration
F3004NNL0300CDB 0,06 mm C 3 mm B 6 mm 4 6 mm Safe-λock®
Download after registration
F3004NNL0400CDB 0,08 mm C 4 mm B 8 mm 4 6 mm Safe-λock®
Download after registration
F3004NNL0500CDB 0,10 mm C 5 mm B 10 mm 4 6 mm Safe-λock®
Download after registration
F3004NNL0600CDB 0,12 mm C 6 mm B 13 mm 4 6 mm Safe-λock®
Download after registration
F3004NNL0800CDB 0,16 mm C 8 mm B 19 mm 4 8 mm Safe-λock®
Download after registration
F3004NNL1000CDB 0,2 mm C 10 mm B 22 mm 4 10 mm Safe-λock®
Download after registration
F3004NNL1200CDB 0,24 mm C 12 mm B 26 mm 4 12 mm Safe-λock®
Download after registration
F3004NNL1400CDB 0,28 mm C 14 mm B 26 mm 4 14 mm Safe-λock®
Download after registration
F3004NNL1600CDB 0,32 mm C 16 mm B 36 mm 4 16 mm Safe-λock®
Download after registration
F3004NNL1800CDB 0,36 mm C 18 mm B 36 mm 4 18 mm Safe-λock®
Download after registration
F3004NNL2000CDB 0,40 mm C 20 mm B 41 mm 4 20 mm Safe-λock®
Download after registration
Experience Haimer
Experience Haimer
Online presentation
 Experience Haimer
With our demo van at your site
 Experience Haimer
At the Haimer Application Center
more information
Services
Services
regrinding service
 Services
Upgrades or software updates
 Services
downloadcenter
show all services
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter