HAIMER MILL Power Series - F1004NN Chamfer
Solid carbide end mill
Characteristics
Corner chamfer 45°
Teeth 4
Helix angle 41/43°
Applications
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Slotting
Side milling
Areas of application-material
Steel
Stainless steel
Cast iron
High temperature alloys and titanium alloys
NF metals
Hard materials
HAIMER MILL Power Series - F1004NN Chamfer
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")
Universal solid carbide end mill for a broad range of applications
- Shank tolerance: h5
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal Helix
- Fine balanced < 1 gmm
- Runout < 5 µm (< 0.0002")
- Polished gullets
- For almost all materials
- For roughing and finishing
- For trochoidal milling
HAIMER MILL Power Series - F1004NN Chamfer
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| D1 Tolerance | h9 | |
| Corner design | C | |
| Shank version | Safe-λock® | |
| Helix angle | 41/43 ° | |
| HAIMER Material | A | |
| HAIMER Coating | A | |
| Mass (weight) | D7 | 0,024 kg |
| Standard number of properties layout | NSM | DIN4000-82 |
| Company identification | J3 | HAI |
| Weight | WT | 0,024 kg |
Characteristics
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
Helix angle 41/43°
Helix angle 41/43°
Helix angle 41/43°
Applications
- For almost all materials
- For roughing and finishing
- For trochoidal milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Cutting Data
HAIMER MILL Power Series - F1004NN Chamfer
Description
HAIMER MILL Power Series - F1004NN Chamfer
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")
Universal solid carbide end mill for a broad range of applications
- Shank tolerance: h5
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal Helix
- Fine balanced < 1 gmm
- Runout < 5 µm (< 0.0002")
- Polished gullets
- For almost all materials
- For roughing and finishing
- For trochoidal milling
Technical specifications
HAIMER MILL Power Series - F1004NN Chamfer
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| D1 Tolerance | h9 | |
| Corner design | C | |
| Shank version | Safe-λock® | |
| Helix angle | 41/43 ° | |
| HAIMER Material | A | |
| HAIMER Coating | A | |
| Mass (weight) | D7 | 0,024 kg |
| Standard number of properties layout | NSM | DIN4000-82 |
| Company identification | J3 | HAI |
| Weight | WT | 0,024 kg |
Characteristics
Corner chamfer 45°
Corner chamfer 45°
Corner chamfer 45°
Teeth 4
Teeth 4
Teeth 4
Helix angle 41/43°
Helix angle 41/43°
Helix angle 41/43°
Applications
Applications
- For almost all materials
- For roughing and finishing
- For trochoidal milling
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
cutting data
Cutting Data
HAIMER MILL Power Series - F1004NN Chamfer
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
| Order No. | Chamfer size | Corner design | Cutting edge diameter | HAIMER Coating | Length of cutting edge | Number of cutting edges | Shank diameter | Shank version | Downloads | metric/ inch |
|---|---|---|---|---|---|---|---|---|---|---|
| F1004NNB0200CAA | 0,1 mm | C | 2 mm | A | 7 mm | 4 | 6 mm | Weldon shank |
Download after registration
|
|
| F1004NNB0300CAA | 0,1 mm | C | 3 mm | A | 8 mm | 4 | 6 mm | Weldon shank |
Download after registration
|
|
| F1004NNB0400CAA | 0,15 mm | C | 4 mm | A | 11 mm | 4 | 6 mm | Weldon shank |
Download after registration
|
|
| F1004NNB0500CAA | 0,2 mm | C | 5 mm | A | 13 mm | 4 | 6 mm | Weldon shank |
Download after registration
|
|
| F1004NNB0600CAA | 0,2 mm | C | 6 mm | A | 13 mm | 4 | 6 mm | Weldon shank |
Download after registration
|
|
| F1004NNB0800CAA | 0,2 mm | C | 8 mm | A | 19 mm | 4 | 8 mm | Weldon shank |
Download after registration
|
|
| F1004NNB1000CAA | 0,3 mm | C | 10 mm | A | 22 mm | 4 | 10 mm | Weldon shank |
Download after registration
|
|
| F1004NNB1200CAA | 0,3 mm | C | 12 mm | A | 26 mm | 4 | 12 mm | Weldon shank |
Download after registration
|
|
| F1004NNB1400CAA | 0,4 mm | C | 14 mm | A | 26 mm | 4 | 14 mm | Weldon shank |
Download after registration
|
|
| F1004NNB1600CAA | 0,5 mm | C | 16 mm | A | 32 mm | 4 | 16 mm | Weldon shank |
Download after registration
|
|
| F1004NNB1800CAA | 0,5 mm | C | 18 mm | A | 32 mm | 4 | 18 mm | Weldon shank |
Download after registration
|
|
| F1004NNB2000CAA | 0,6 mm | C | 20 mm | A | 38 mm | 4 | 20 mm | Weldon shank |
Download after registration
|
|
| F1004NNH0200CAA | 0,1 mm | C | 2 mm | A | 7 mm | 4 | 6 mm | Straight shank |
Download after registration
|
|
| F1004NNH0300CAA | 0,1 mm | C | 3 mm | A | 8 mm | 4 | 6 mm | Straight shank |
Download after registration
|
|
| F1004NNH0400CAA | 0,15 mm | C | 4 mm | A | 11 mm | 4 | 6 mm | Straight shank |
Download after registration
|
|
| F1004NNH0500CAA | 0,2 mm | C | 5 mm | A | 13 mm | 4 | 6 mm | Straight shank |
Download after registration
|
|
| F1004NNH0600CAA | 0,2 mm | C | 6 mm | A | 13 mm | 4 | 6 mm | Straight shank |
Download after registration
|
|
| F1004NNH0800CAA | 0,2 mm | C | 8 mm | A | 19 mm | 4 | 8 mm | Straight shank |
Download after registration
|
|
| F1004NNH1000CAA | 0,3 mm | C | 10 mm | A | 22 mm | 4 | 10 mm | Straight shank |
Download after registration
|
|
| F1004NNH1200CAA | 0,3 mm | C | 12 mm | A | 26 mm | 4 | 12 mm | Straight shank |
Download after registration
|
|
| F1004NNH1400CAA | 0,4 mm | C | 14 mm | A | 26 mm | 4 | 14 mm | Straight shank |
Download after registration
|
|
| F1004NNH1600CAA | 0,5 mm | C | 16 mm | A | 32 mm | 4 | 16 mm | Straight shank |
Download after registration
|
|
| F1004NNH1800CAA | 0,5 mm | C | 18 mm | A | 32 mm | 4 | 18 mm | Straight shank |
Download after registration
|
|
| F1004NNH2000CAA | 0,6 mm | C | 20 mm | A | 38 mm | 4 | 20 mm | Straight shank |
Download after registration
|
|
| F1004NNL0200CAA | 0,1 mm | C | 2 mm | A | 7 mm | 4 | 6 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL0300CAA | 0,1 mm | C | 3 mm | A | 8 mm | 4 | 6 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL0400CAA | 0,15 mm | C | 4 mm | A | 11 mm | 4 | 6 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL0500CAA | 0,2 mm | C | 5 mm | A | 13 mm | 4 | 6 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL0600CAA | 0,2 mm | C | 6 mm | A | 13 mm | 4 | 6 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL0800CAA | 0,2 mm | C | 8 mm | A | 19 mm | 4 | 8 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL1/2ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL1/4ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL1/8ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL1000CAA | 0,3 mm | C | 10 mm | A | 22 mm | Safe-λock® |
Download after registration
|
|||
| F1004NNL1200CAA | 0,3 mm | C | 12 mm | A | 26 mm | 4 | 12 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL1400CAA | 0,4 mm | C | 14 mm | A | 26 mm | 4 | 14 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL1600CAA | 0,5 mm | C | 16 mm | A | 32 mm | 4 | 16 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL1800CAA | 0,5 mm | C | 18 mm | A | 32 mm | 4 | 18 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL1ZCAA | C | A | Safe-λock® |
Download after registration
|
||||||
| F1004NNL2000CAA | 0,6 mm | C | 20 mm | A | 38 mm | 4 | 20 mm | Safe-λock® |
Download after registration
|
|
| F1004NNL3/16ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL3/32ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL3/4ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL3/8ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL5/16ZCAA | C | A | Safe-λock® |
|
||||||
| F1004NNL5/8ZCAA | C | A | Safe-λock® |
|
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001