Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Solid carbide end mill
slide 3 of 2
slide 1 to 2 of 2
Characteristics
Sharp cutting edge
Teeth 3
Helix angle 35/36/37°
Safe-Lock (S-λ)
Applications
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Slotting
Side milling
Areas of application-material
Steel
Stainless steel
Cast iron
High temperature alloys and titanium alloys
NF metals
Hard materials
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")
- Shank tolerance: h5
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal Helix
- Fine balanced < 1 gmm
- Runout < 5 µm (< 0.0002")
- Polished gullets
- For almost all materials
- For roughing and finishing
- For sharp, right angled transitions
slide 2 of 4
slide 1 to 3 of 4
Safe-λock®: The patented pullout protection from HAIMER
- Maximum pull-out protection
- Best run-out accuracy
- Maximum cutting volume
- Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
- Maximum pull-out protection
- Best run-out accuracy
- Maximum cutting volume
- Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
- Pullout protection with length adjustment
- Highly precise runout accuracy of < 3 μm at 3 × D
- No pullout or rotation of the cutting tool
- Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
- Top quality at each delivery
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Description | Norm: | Value: metric/ inch |
---|---|---|
Cutting edge diameter | D1 | 20 mm |
D1 Tolerance | h9 | |
Number of cutting edges | Z | 3 |
Corner design | S | |
Length of cutting edge | L1 | 38 mm |
Overalllength | L | 105 mm |
Neck diameter | D2 | 19 mm |
Neck length | L2 | 52 mm |
Shank diameter | D | 20 mm |
Shank version | Safe-λock® | |
Helix angle | 35/36/37 ° | |
HAIMER Material | A | |
HAIMER Coating | A | |
Cutting diameter | A1 | 20 mm |
Peripheral effective cutting edge count | F21 | 3 |
Cutting edge length, max. | B2 | 38 mm |
Overalllength | B5 | 105 mm |
Neck diameter | A5 | 19 mm |
Neck length | B9 | 52 mm |
Connection diameter, machine side | C3 | 20 mm |
Helix angle | F4 | 35/36/37 ° |
Mass (weight) | D7 | 0,407 kg |
Standard number of properties layout | NSM | DIN4000-82 |
item style code | BLD | 2 |
Connection code type machine side | C11 | HSC |
Connection code form type machine side | C12 | 01 |
Connection code style machine side | C15 | 5 |
Connection size code machine side | C2 | 200 |
Hand | F1 | R |
flute helix hand | F3 | R |
face effective cutting edge count | F22 | 3 - |
grade manufacturer's designation | H3 | A |
Coating | H5 | A |
Company identification | J3 | HAI |
Weight | WT | 0,407 kg |
Characteristics
Sharp cutting edge
Sharp cutting edge
Sharp cutting edge
Teeth 3
Teeth 3
Teeth 3
Helix angle 35/36/37°
Helix angle 35/36/37°
Helix angle 35/36/37°
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
- For almost all materials
- For roughing and finishing
- For sharp, right angled transitions
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
Cutting Data
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Description
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Solid carbide end mill
Quality pass
Shank tolerance h5
Fine balanced < 1 gmm
Runout < 5 µm (< 0.0002")
Universal solid carbide end mill with Safe-Lock shank for a broad range of applications.
- Shank tolerance: h5
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Unequal Helix
- Fine balanced < 1 gmm
- Runout < 5 µm (< 0.0002")
- Polished gullets
- For almost all materials
- For roughing and finishing
- For sharp, right angled transitions
slide 2 of 4
slide 1 to 3 of 4
Safe-λock®: The patented pullout protection from HAIMER
- Maximum pull-out protection
- Best run-out accuracy
- Maximum cutting volume
- Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The patented pullout protection from HAIMER
- Maximum pull-out protection
- Best run-out accuracy
- Maximum cutting volume
- Even at tool holders without Safe-Lock consistent clamping forces and torques
Safe-λock®: The new standard for roughing
- Pullout protection with length adjustment
- Highly precise runout accuracy of < 3 μm at 3 × D
- No pullout or rotation of the cutting tool
- Patented: licensing for cutting tool manufacturers possible
Shock-resistant packaging
- Top quality at each delivery
Technical specifications
HAIMER MILL Power Series - F1003NN Sharp cutting edge
Description | Norm: | Value: metric/ inch |
---|---|---|
Cutting edge diameter | D1 | 20 mm |
D1 Tolerance | h9 | |
Number of cutting edges | Z | 3 |
Corner design | S | |
Length of cutting edge | L1 | 38 mm |
Overalllength | L | 105 mm |
Neck diameter | D2 | 19 mm |
Neck length | L2 | 52 mm |
Shank diameter | D | 20 mm |
Shank version | Safe-λock® | |
Helix angle | 35/36/37 ° | |
HAIMER Material | A | |
HAIMER Coating | A | |
Cutting diameter | A1 | 20 mm |
Peripheral effective cutting edge count | F21 | 3 |
Cutting edge length, max. | B2 | 38 mm |
Overalllength | B5 | 105 mm |
Neck diameter | A5 | 19 mm |
Neck length | B9 | 52 mm |
Connection diameter, machine side | C3 | 20 mm |
Helix angle | F4 | 35/36/37 ° |
Mass (weight) | D7 | 0,407 kg |
Standard number of properties layout | NSM | DIN4000-82 |
item style code | BLD | 2 |
Connection code type machine side | C11 | HSC |
Connection code form type machine side | C12 | 01 |
Connection code style machine side | C15 | 5 |
Connection size code machine side | C2 | 200 |
Hand | F1 | R |
flute helix hand | F3 | R |
face effective cutting edge count | F22 | 3 - |
grade manufacturer's designation | H3 | A |
Coating | H5 | A |
Company identification | J3 | HAI |
Weight | WT | 0,407 kg |
Characteristics
Sharp cutting edge
Sharp cutting edge
Sharp cutting edge
Teeth 3
Teeth 3
Teeth 3
Helix angle 35/36/37°
Helix angle 35/36/37°
Helix angle 35/36/37°
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Safe-Lock (S-λ)
Applications
Applications
- For almost all materials
- For roughing and finishing
- For sharp, right angled transitions
AREAS OF APPLICATION - MATERIAL
MAIN AREA OF APPLICATION
Steel
P
All types of steel and cast steel, with the exception of steel with an austenitic structure
FURTHER AREAS OF APPLICATION
Stainless steel
M
Stainless austenitic steel and austenitic-ferritic steel and cast steel
Cast iron
K
Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
High temperature alloys and titanium alloys
S
Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
NF metals
N
Aluminium and other non-ferrous metals, non ferrous materials
Hard materials
H
Hardened steel, hardened cast iron materials, chilled cast iron
Operations
Feed direction (Side milling, Ramping, Drilling)
Feed direction (Side milling, Ramping, Drilling)
Ramping 3-5°
Ramping 3-5°
Slotting
Slotting
Side milling
Side milling
Cooling
Emulsion
Emulsion
Cold air
Cold air
Dry machining
Dry machining
Minimal lubrication
Minimal lubrication
Downloads
Downloads
Register to get access to free downloads of CAD data (DXF and STP) on our product websites.
cutting data
Cutting Data
HAIMER MILL Power Series - F1003NN Sharp cutting edge
All product variants
With the help of our filter you can refine your search by selecting attributes.
Filter
Order No. | Corner design | Cutting edge diameter | HAIMER Coating | Length of cutting edge | Number of cutting edges | Shank diameter | Shank version | Downloads | metric/ inch |
---|---|---|---|---|---|---|---|---|---|
F1003NNB0200SAA | S | 2 mm | A | 7 mm | 3 | 6 mm | Weldon shank |
Download after registration
|
|
F1003NNB0300SAA | S | 3 mm | A | 8 mm | 3 | 6 mm | Weldon shank |
Download after registration
|
|
F1003NNB0400SAA | S | 4 mm | A | 11 mm | 3 | 6 mm | Weldon shank |
Download after registration
|
|
F1003NNB0500SAA | S | 5 mm | A | 13 mm | 3 | 6 mm | Weldon shank |
Download after registration
|
|
F1003NNB0600SAA | S | 6 mm | A | 13 mm | 3 | 6 mm | Weldon shank |
Download after registration
|
|
F1003NNB0800SAA | S | 8 mm | A | 19 mm | 3 | 8 mm | Weldon shank |
Download after registration
|
|
F1003NNB1000SAA | S | 10 mm | A | 22 mm | 3 | 10 mm | Weldon shank |
Download after registration
|
|
F1003NNB1200SAA | S | 12 mm | A | 26 mm | 3 | 12 mm | Weldon shank |
Download after registration
|
|
F1003NNB1400SAA | S | 14 mm | A | 26 mm | 3 | 14 mm | Weldon shank |
Download after registration
|
|
F1003NNB1600SAA | S | 16 mm | A | 32 mm | 3 | 16 mm | Weldon shank |
Download after registration
|
|
F1003NNB1800SAA | S | 18 mm | A | 32 mm | 3 | 18 mm | Weldon shank |
Download after registration
|
|
F1003NNB2000SAA | S | 20 mm | A | 38 mm | 3 | 20 mm | Weldon shank |
Download after registration
|
|
F1003NNH0200SAA | S | 2 mm | A | 7 mm | 3 | 6 mm | Straight shank |
Download after registration
|
|
F1003NNH0300SAA | S | 3 mm | A | 8 mm | 3 | 6 mm | Straight shank |
Download after registration
|
|
F1003NNH0400SAA | S | 4 mm | A | 11 mm | 3 | 6 mm | Straight shank |
Download after registration
|
|
F1003NNH0500SAA | S | 5 mm | A | 13 mm | 3 | 6 mm | Straight shank |
Download after registration
|
|
F1003NNH0600SAA | S | 6 mm | A | 13 mm | 3 | 6 mm | Straight shank |
Download after registration
|
|
F1003NNH0800SAA | S | 8 mm | A | 19 mm | 3 | 8 mm | Straight shank |
Download after registration
|
|
F1003NNH1000SAA | S | 10 mm | A | 22 mm | 3 | 10 mm | Straight shank |
Download after registration
|
|
F1003NNH1200SAA | S | 12 mm | A | 26 mm | 3 | 12 mm | Straight shank |
Download after registration
|
|
F1003NNH1400SAA | S | 14 mm | A | 26 mm | 3 | 14 mm | Straight shank |
Download after registration
|
|
F1003NNH1600SAA | S | 16 mm | A | 32 mm | 3 | 16 mm | Straight shank |
Download after registration
|
|
F1003NNH1800SAA | S | 18 mm | A | 32 mm | 3 | 18 mm | Straight shank |
Download after registration
|
|
F1003NNH2000SAA | S | 20 mm | A | 38 mm | 3 | 20 mm | Straight shank |
Download after registration
|
|
F1003NNL0200SAA | S | 2 mm | A | 7 mm | 3 | 6 mm | Safe-λock® |
Download after registration
|
|
F1003NNL0300SAA | S | 3 mm | A | 8 mm | 3 | 6 mm | Safe-λock® |
Download after registration
|
|
F1003NNL0400SAA | S | 4 mm | A | 11 mm | 3 | 6 mm | Safe-λock® |
Download after registration
|
|
F1003NNL0500SAA | S | 5 mm | A | 13 mm | 3 | 6 mm | Safe-λock® |
Download after registration
|
|
F1003NNL0600SAA | S | 6 mm | A | 13 mm | 3 | 6 mm | Safe-λock® |
Download after registration
|
|
F1003NNL0800SAA | S | 8 mm | A | 19 mm | 3 | 8 mm | Safe-λock® |
Download after registration
|
|
F1003NNL1/2ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL1/4ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL1/8ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL1000SAA | S | 10 mm | A | 22 mm | Safe-λock® |
Download after registration
|
|||
F1003NNL1200SAA | S | 12 mm | A | 26 mm | 3 | 12 mm | Safe-λock® |
Download after registration
|
|
F1003NNL1400SAA | S | 14 mm | A | 26 mm | 3 | 14 mm | Safe-λock® |
Download after registration
|
|
F1003NNL1600SAA | S | 16 mm | A | 32 mm | 3 | 16 mm | Safe-λock® |
Download after registration
|
|
F1003NNL1800SAA | S | 18 mm | A | 32 mm | 3 | 18 mm | Safe-λock® |
Download after registration
|
|
F1003NNL1ZSAA | S | A | Safe-λock® |
Download after registration
|
|||||
F1003NNL2000SAA | S | 20 mm | A | 38 mm | 3 | 20 mm | Safe-λock® |
Download after registration
|
|
F1003NNL3/16ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL3/32ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL3/4ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL3/8ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL5/16ZSAA | S | A | Safe-λock® |
|
|||||
F1003NNL5/8ZSAA | S | A | Safe-λock® |
|
1
2
3
4
5
6
7
8
Haimer Care
The quality at Haimer is not only
by the product, but also by the
accompanying services.
Scope of service
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001