The Digital 3D-Sensor is a further development of the time proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.
The spindle may be positioned quickly and safely on the references edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.
The digital display has large numbers that measure in increments of 0.001 mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.
Please take note: The given measuring precision of 0.005 mm only applies, if the original HAIMER probe tips are used.
Included in delivery: 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm
3D-Sensor Digital
- 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Version | Metrisch | |
| Length 1 | L1 | 113 mm |
| Length 2 | L2 | 50 mm |
| Diameter 1 | D1 | 20 mm |
| Diameter 2 | D2 | 4 mm |
| Width | B | 65 mm |
| Smallest unit of measure | 0,001 mm |
The Digital 3D-Sensor is a further development of the time proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.
The spindle may be positioned quickly and safely on the references edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.
The digital display has large numbers that measure in increments of 0.001 mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.
Please take note: The given measuring precision of 0.005 mm only applies, if the original HAIMER probe tips are used.
Included in delivery: 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm
- 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Version | Metrisch | |
| Length 1 | L1 | 113 mm |
| Length 2 | L2 | 50 mm |
| Diameter 1 | D1 | 20 mm |
| Diameter 2 | D2 | 4 mm |
| Width | B | 65 mm |
| Smallest unit of measure | 0,001 mm |
| Order No. | Version | Downloads | metric/ inch |
|---|---|---|---|
| 80.460.00.FHN | Metrisch |
|
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001