Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
说明
Power Mini Shrink Chuck ISO 26623-1 PSC 50
质量护照
刀柄精细动平衡 G2.5， 25,000 1/min
所有的功能表面都是精加工的
精度超过DIN标准的要求
与 Capto 兼容
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
翰默-提普
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint/Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
技术规格
通知
Technical data subjects to change without prior notice.
| 说明 | 规范： 翰默 | 价值： 公制/寸 |
|---|---|---|
| 夹持部位的直径 | D1 | 4 mm / 0.157 inch |
| 长度A | A | 100 mm / 3.937 inch |
| A长度的版本 | lang | |
| 直径2 | D2 | 10 mm / 0.394 inch |
| 长度 | L | 50 mm / 1.969 inch |
| 接口 | PSC50 |