Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
Power Mini Shrink Chuck ISO 26623-1 PSC 40
Power Mini Shrink Chuck ISO 26623-1 PSC 40
质量护照
刀柄精细动平衡 G2.5， 25,000 1/min
所有的功能表面都是精加工的
精度超过DIN标准的要求
与 Capto 兼容
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
翰默-提普
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint / Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
Power Mini Shrink Chuck ISO 26623-1 PSC 40
| 说明 | 规范： | 价值： 公制/ 寸 |
|---|---|---|
| 夹持部位的直径 | D1 | 3 mm |
| 长度A | A | 100 mm |
| A长度的版本 | 长 | |
| 直径2 | D2 | 9 mm |
| 长度 | L | 50 mm |
| 接口 | PSC40 |
说明
Power Mini Shrink Chuck ISO 26623-1 PSC 40
质量护照
刀柄精细动平衡 G2.5， 25,000 1/min
所有的功能表面都是精加工的
精度超过DIN标准的要求
与 Capto 兼容
Power Mini Shrink Chuck is perfect for 5-axis-machining of parts, that are difficult to access. Therefore efficient milling is possible with an angled tool even at long protruding lengths.
- 3 mm wall thickness
- 3° angle at the top
- With threaded holes in order to balance with balancing screws
- For solid carbide tools with shank tolerance h6
- Heat resistant hot-working steel
- Hardened 54 - 2 HRC
翰默-提普
Heating and cooling sleeves are needed when shrinking on most shrink fit machines (see accessories). However, when using the Power Clamp i4.0 Sprint / Air or Nano machines with the motorised coil and scanner, sleeves are not necessary.
技术规格
Power Mini Shrink Chuck ISO 26623-1 PSC 40
| 说明 | 规范： | 价值： 公制/ 寸 |
|---|---|---|
| 夹持部位的直径 | D1 | 3 mm |
| 长度A | A | 100 mm |
| A长度的版本 | 长 | |
| 直径2 | D2 | 9 mm |
| 长度 | L | 50 mm |
| 接口 | PSC40 |
所有产品种类
借助我们的过滤器，您可以通过选择属性来缩小搜索范围。
变体过滤器
| 订购号 | A长度的版本 | 夹持部位的直径 | 接口 | 长度A | 下载 | 公制/ 寸 |
|---|---|---|---|---|---|---|
| CC4.181.03.8 | 长 | 3 mm | PSC40 | 100 mm |
|
|
| CC4.181.04.8 | 长 | 4 mm | PSC40 | 100 mm |
|
|
| CC4.181.05.8 | 长 | 5 mm | PSC40 | 100 mm |
|
|
| CC4.181.06.8 | 长 | 6 mm | PSC40 | 100 mm |
|
|
| CC4.181.08.8 | 长 | 8 mm | PSC40 | 100 mm |
|
|
| CC4.181.10.8 | 长 | 10 mm | PSC40 | 100 mm |
|
|
| CC4.181.12.8 | 长 | 12 mm | PSC40 | 100 mm |
|
|
| CC4.181.16.8 | 长 | 16 mm | PSC40 | 100 mm |
|
